![]() | ![]() |
| Home | Gallery | Classifieds | Arcade | Store | Privacy | Support Us | ![]() |
| |||||||
Welcome to New England Streetriders! You are currently viewing the site as a guest which gives you limited access to most features. | ||||
| | ||||
These ads do not show to registered members. Register Now! |
![]() |
| | LinkBack | Thread Tools |
|
#1
| |||
| |||
Rim straightening? Any recommendations?My friend needs to get a aluminum front rim straightened. We went out riding yesturday and both almost ate it. He ended up with a sliced front tire and a bent rim. Whats it going to cost / where can he get it done? Its not that bad, not cracked yet, its bent out about 1/4th an inch over a 3 inch area so its not creased. I was 2 cars in front of him on 3A in MA where they have the road all dug up, going to 3a Motorsports from nashua. The road was all dug up and there were manhole covers and gas mains sticking 3-5 inches out of the road everywhere, some painted, some not.. I got to 3A and noticed he wasnt behind the car behind me anymore and there was a noticable gap in traffic. So I head back down the road looking for whatever ditch he might have ended up in. I didnt notice him at a garage that our friend works at and went by. I stopped at the beginning of the construction zone and called, so he told me where he was. So as I crest a small hill I see them standing on the side of the road about 250 feet up. As soon as I crest the hill theres a, unpainted gas main sticking up 5 inches out of the grooved pavement, I nailed it dead center at about 30. It got really ugly, bike went up kicked out sideways then over corrected with the rear tire locked up, skidded around for a bit but eventually straightened it out and caught my breath as I pulled into the repair station they were at. They come running over and I look at my friend and im like is that... he says YUP same one I hit! Im going to check my tires again today for any damage, I think I was ok because I hit it dead center. He lipped it so his rim too most of it. We both could have gone down pretty hard though. There anything he can do to get the state to pay for a rim and tire? We stopped at the police station and they recommended we contact MA state Highway. -Lou |
|
#2
| ||||
| ||||
Rim straightening? Any recommendations?www.mcwheel.com I've had them repair a couple of wheels for my SV, one was bent only (4 places not visible with naked eye, but caused pulsing while braking) the other, was a rear that my rear caliper slamed into making a 2" gash they had to weld then straighten they have real quick turn around, a day or two at most, or they may have a repaired wheel in stock for your bike |
|
#3
| ||||
| ||||
Rim straightening? Any recommendations?Noah is the Man there. Real good guys. |
|
#4
| |||
| |||
Rim straightening? Any recommendations?Called my friend and let him know. Looks like its about a 100$ min charge. Looking at some of the other rims on that page that were fixed this looks like an easy fix. Im trying to convince him to drive out to Keene with me, drop it off, party at the local bars, stay over, pick the rim up the next day and drive back home. (looks like an extra 25$ is enough to expedite a rim to next day service lol) On a side note. When i road home yesturday after hitting that stupid thing and nearly hurting myself... I was pretty shaken up. How longs that typically last? I didnt head out at all today because I didnt know how is be on the bike. I have to ride it to work tomorrow either way but how longs the jitters last or should I just get over it and wait for the next time somethin happens to worry again heh. |
|
#5
| ||||
| ||||
Rim straightening? Any recommendations?Quote:
|
|
#6
| ||||
| ||||
Rim straightening? Any recommendations?I had them fix my front rim this past summer $120 and it was fixed. |
|
#7
| ||||
| ||||
Rim straightening? Any recommendations?+1 MC Wheel...used them 2x so far, both were good experiences. Last time I drove there and they literally 'turned it around' in under 1 hour. |
|
#8
| |||
| |||
Rim straightening? Any recommendations?MC Wheel...drove mine up, had it done in two hours, go grab lunch at applebees and it's done. |
|
#9
| |||
| |||
Rim straightening? Any recommendations?with no intention of hijacking this thread.... I also need a wheel straightened, but on eBay I can get the wheel brand new for $125 shipped. Is it better to get a wheel straightened, or get a new wheel? |
|
#10
| ||||
| ||||
Rim straightening? Any recommendations?Quote:
|
|
#11
| ||||
| ||||
Rim straightening? Any recommendations?Quote:
I did both, got a set of wheels on ebay and got mine straightened, now I have a spare set with my dulasport tires mounted |
|
#12
| ||||
| ||||
Rim straightening? Any recommendations?I've sent rims to MC Wheel for years, always good work and quick turn around. |
![]() |
|
| Thread Tools | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Recommendations for a Cigar | TheIglu | Off-Topic Stuff | 41 | 07-20-05 06:24 PM |
| Mountain Bike Recommendations | TheIglu | Off-Topic Stuff | 17 | 08-19-04 03:45 PM |
| Glove recommendations? | Honclfibr | General Bike Related | 20 | 02-19-04 04:04 PM |
| Rim straightening... | VinceF2 | Bike Maintenance | 8 | 10-14-03 12:17 PM |
| Tire recommendations... | benVFR | General Bike Related | 11 | 06-14-02 08:17 PM |