my winter project

[Punjistick]

I also suspect that MA is afraid of loosing jobs from insurance companies who might threaten to leave the state at any talk of change.

[bigred875]

I also suspect that MA is afraid of loosing jobs from insurance companies who might threaten to leave the state at any talk of change.

possibly but it would also bring in the other companies and change it to a capitalistic market like it should.....

anyhow....hey fasterthanu you dont with this POS yet?

[Wishbone]

been busy, just gotta put it all back together

and red any time you "wanna run it" let me know

hows about you, pete take care of ya yet?



also ins. rates will be going down soon for people in mass with good records, my ins. lady told me yesterday. so that still counts me out

[Wishbone]

took the fizzy for the first spin around the block

while its not 100% it sure was damn fun, especially cause it was late and there was no can one it

just got to finish up some odds and ends and ill be in business

[beet]

CF is sweet

[bigred875]

been busy, just gotta put it all back together

and red any time you "wanna run it" let me know

hows about you, pete take care of ya yet?



also ins. rates will be going down soon for people in mass with good records, my ins. lady told me yesterday. so that still counts me out

lol no problem, soon as you get that pile running we'll do it....do i pick the road?

[bigred875]

damnit, its already running, ok, when i get MY pile running we'll do it

[Wishbone]

almost there

my new bolts



covered pipe



hows my sliders now



view from the cockpit







cf wrapped can and side panel and tank



you can slightly see the switch for the heated grips

[rayslinky]

What'd u use for the camera/lcd?

[Wishbone]

What'd u use for the camera/lcd?

ebay led reversing camera and 5.6 inch monitor

[rayslinky]

ebay led reversing camera and 5.6 inch monitor

is the lcd waterproof/resistant?

[Wishbone]

no but its behind the fly screen, so if its raining it should go over it

and it comes of easy so i can take it in side at night so i can save it from the weather and the hood

[Hoser]

That looks like a pretty cool set up.

Leave it to an Electrician too make a mess of the wiring.

I have to demo my bathroom this week........I never painted the last one until just before I sold the house.

[Wishbone]

thanks pete, but the wiring will be neatened up. that is just the first draft to make sure every thing works the way i wanted it to

[Wishbone]

so after i started i ran out of time and money

and this is the results







what i did

brembo master. versah pads. ss lines. billet tunning fork cover

hole shot stage 2 jet kit with pod filter and timing advance

total gmd front suspension, big bucks but worth it

re-sprung and serviced rear

woodcraft clip-ons

heated grips

cf tank, side panels and pipe. alot more work than i thought. wish i just painted

cut and memory foamed seat, and new pleather

nesr sticker on fly screen (about 10rwhp)

2ct's although added in the fall

1 down two up sprocket with 520 regina gold chain conversion

liquid metaled my crank case untill i get a woodcraft

new front blinkers moved to lower fairing

ported my intake pods for a clamed 3-5 top end rwhp

suposed to be 145-150 rwhp with headers(that i don't have) makes good smooth power as of now

not bad for my first go around with a bike. but it sux. i still need to sand and paint the cf. need a new paint job because the one i got was doe by a rookie. need to put more foam in the seat to make it look good(even though it feels great) need to dial in the suspension. need to put a penske on. i only had enough to re-spring and change the oil on the stocker. need to put headers on. need rear sets and switch the stock shift linkage for a r1. need to get a cover for the rear view camera monitor because what i got has to much glare. need a speedo healer. and the list goes on

so yeah i should have started with a r1. but what the hell i learned alot and its different. stops on a dime and gets out of the way

[The Snowman]

I speak for those who don't trust themselves to work on their own bikes. At least you dove into it head first.

[Wishbone]

thanks chuck, but are you feeling ok? i didn't sense any sarcasm in your post

[The Snowman]

thanks chuck, but are you feeling ok? i didn't sense any sarcasm in your post

It's a good day. Father's Day.

No sarcasm at all. I've been getting brave, but not with anything to do with fuel delivery or engine mechanical. I actually painted the mirror stalks this weekend.

I don't think I'd ever do carb or engine work myself.

[Wishbone]

It's a good day. Father's Day.

No sarcasm at all. I've been getting brave, but not with anything to do with fuel delivery or engine mechanical. I actually painted the mirror stalks this weekend.

I don't think I'd ever do carb or engine work myself.

give the man a standing ovation glad to hear you got brave and i bet it wont blow up or anything