[beet]

Originally Posted by 02Telefonica

I always liked the LeoVince. I found a set of bolt-ons for the TL that I was considering getting, but I don't exactly have the $600 just lying around at the moment.

wyle just sold a set.

[gcastor]

Originally Posted by sxlova07

+1 the 2bros on my R1 sounds badass...but I've heard it for other bikes, and was not all that impressed. Personally the taylormade exhaust is pimp...by far the cleaniest looking one I've seen

I just ceramic coated one very silimlar to this one today. I think they look bada$$ on the bike. They are made for the R1 by MCM Customs in Manchester

[sxlova07]

Originally Posted by gcastor

I just ceramic coated one very silimlar to this one today. I think they look bada$$ on the bike. They are made for the R1 by MCM Customs in Manchester

Greg funny you put that pic up....I bought a homemade version on the MCM and was going to put it on my '01 R1 when I had it. Def gives the bike a clean look.

[gcastor]

Originally Posted by sxlova07

Greg funny you put that pic up....I bought a homemade version on the MCM and was going to put it on my '01 R1 when I had it. Def gives the bike a clean look.

Yes it does make it look clean...Have you heard how they sound? I'm betting pretty sweet!!!!

[sxlova07]

Originally Posted by gcastor

Yes it does make it look clean...Have you heard how they sound? I'm betting pretty sweet!!!!

personally I dont mind the sound...would prefer it to be a bit quieter, and less raspy. here is a vid I dug up on what it sounds like: http://www.electrici.net/video/cruising%20speed.mov

[Billy]

Bill,

Get the F'in Taylormade already so I can hear it in person!!!!

[SVRACER01]

dale will be back at 3PST. ill call about the hi-mount.

[KillBill]

So, I ordered it today, should be in by late this week and on by the following.

Can't wait to hear it.

[Billy]

Bill,

So what are your plans? You just going to put the pipe on or you going to tune the bike as well?

When I say tune I mean the following:
Disable SET Vale
remap without PCIII, or install a PCIII and dyno tune it.

That is one loud ass exhaust.

[KillBill]

Originally Posted by BadBoyBilly

Bill,

So what are your plans? You just going to put the pipe on or you going to tune the bike as well?

When I say tune I mean the following:
Disable SET Vale
remap without PCIII, or install a PCIII and dyno tune it.

Well, i have to either adjust the set valve or adjust the set valve since i'm getting a false FI warning.

Would you mind giving me a hand once i get the pipe on to reset or disable the valve?

I have to wait on the power commander until i get the funds in place.

[Billy]

Originally Posted by KillBill

Well, i have to either adjust the set valve or adjust the set valve since i'm getting a false FI warning.

Would you mind giving me a hand once i get the pipe on to reset or disable the valve?

I have to wait on the power commander until i get the funds in place.

You mean disable the SET Valve? Yea if you need help I can assist. Seems very simple to do. Only concern is identifying the #30 wire in the SET Valve disable directions. Hopefully the wire harness is labeled good.

Like we've said you don't have to get the PCIII. See how it runs without a remap or PCIII. If it runs good then keep it like that. If it runs sloppy try a ECU remap without a PCIII. If it still runs sloppy with the ECU remap then you'll have to go the PCIII way.

[Punjistick]

If you want to diasable the SET but leave all the cables and junk in place then this is the easiest way to do it. Set Valve Deactivated on 04 1K - Gixxer.com

as for identifying the #30 wire, here's how:
the ECM has two plugs one black and one grey. You want the black one.
"clip or remove the #30 wire on the black ECM. i found it was easy to unplug both the black and grey ECM's and get at the wire. the pins on the ECM are 1-17 for 1 row, 18-34 for the other." The wire you want is black with a brown stripe and is near the orange wire with purple stripe. It will be on the bottom row if the plug is still connected to the ECU.

[KillBill]

Originally Posted by Punjistick

If you want to diasable the SET but leave all the cables and junk in place then this is the easiest way to do it. Set Valve Deactivated on 04 1K - Gixxer.com

as for identifying the #30 wire, here's how:
the ECM has two plugs one black and one grey. You want the black one.
"clip or remove the #30 wire on the black ECM. i found it was easy to unplug both the black and grey ECM's and get at the wire. the pins on the ECM are 1-17 for 1 row, 18-34 for the other." The wire you want is black with a brown stripe and is near the orange wire with purple stripe. It will be on the bottom row if the plug is still connected to the ECU.

Thanks Buddy!

You me and Billy will all have to meet up sometime soon. Tha Gixxer Crew

[Punjistick]

I've never done it but from all my wanderings on gixxer.com I think I have a good idea of how it's done. Let me know when you want to do it. We can all meet up.

[Billy]

yes we'll have a Gixxer party.

[KillBill]

I'll bring the Cigars!

Billy, you can order the stipperz

[Billy]

Yes strippers are gooooooooooooooooooooooooooood. My friend Cory is a stripper but she lives in Vegas. Too bad she doesnt live around here. You guys want a pic?

[selltekk]

What kind of question is that? Of course we want a pic!

[KillBill]

Originally Posted by BadBoyBilly

Yes strippers are gooooooooooooooooooooooooooood. My friend Cory is a stripper but she lives in Vegas. Too bad she doesnt live around here. You guys want a pic?

Dude.


You gotta know that was a rhetorical question!

[Billy]

I know you guys want pic's. I just wanted a little begging.

[KillBill]

Nice dude. I like the first pic the best.

Is that your "friend"?

[Billy]

I met her out in Vegas last summer. Unfortunately she isn't that kind of friend. We talk on a weekly basis and she keeps me up to date with what's hot out there. Cool chick.

[KillBill]

Ok, so this isn't my bike but this the basic look

[Trackday Guru]

Go with the LeoVince - you won't be disappointed.
Good luck.

[union]

Originally Posted by KillBill

Thanks Buddy!

You me and Billy will all have to meet up sometime soon. Tha Gixxer Crew

Originally Posted by Punjistick

I've never done it but from all my wanderings on gixxer.com I think I have a good idea of how it's done. Let me know when you want to do it. We can all meet up.

Originally Posted by BadBoyBilly

yes we'll have a Gixxer party.

I might have to crash this with my RC and show you all what sound is