[DBConz]

My plate kit got banged up from my lowside on Labor Day, and I'm looking to replace it now. I cant seem to find anything on eBay, and I dont want to drill holes in my undertail or get the swingarm kit. This kit bolts on to the passenger peg, if you cant see from the pictures. I know the pictures suck, but that's all I have that shows the plate.
Anyone know what this kit is called, or where I can get one?
Gracias!

[R1slowflyer]

It think the mounting kit you have is called

zip-tie

I believe they sell them at the cheapo.

[DBConz]

the zip tie is to keep the LED plate light from getting caught. I'm looking for a better LED plate light too, needed one last second to get a sticker

[nerijusj]

Just fab something up yourself. Why pay money for a simple thing like that? I did mine. Couple brackets from home depot and it's all set Cost like $4. Doing work on your bike- priceless

BTW, you don't need a lic. plate light to get a sticker. Well, at least I never had problems cause of it at like 3 different inspection sites.

[DBConz]

i failed everywhere without having a light on my plate. maybe you gave them a special treat for over-looking the plate light?

[nerijusj]

Why did you put a picture of fasterthanu? He's gonna be pissed

[DBConz]

Originally Posted by nerijusj

Why did you put a picture of fasterthanu? He's gonna be pissed

if that's true, wouldnt it be fatterthanu ?

[nerijusj]

Originally Posted by DBConz

if that's true, wouldnt it be fatterthanu ?

[l3uddha]

Originally Posted by nerijusj

Why did you put a picture of fasterthanu? He's gonna be pissed

[Wishbone]

Originally Posted by nerijusj

Why did you put a picture of fasterthanu? He's gonna be pissed

BURN!!!





Wait...the burn was on me

And the pinko out of left field with the zinger!

Well played. And for those who don't know, yes I am fat so that was a good one

[DBConz]

wait...am i the pinko out of left field?

[DBConz]

anyone? never got an answer on this one.

[l3uddha]

Originally Posted by DBConz

anyone? never got an answer on this one.

yes, you are a pinko

[DBConz]

thanks, but wrong question

[Tricky Mike]

In my opinion if you had started making one after you made your first post it would be done by now. Go grab some Aluminum from Home Depot, bend it (only bend it once), drill a hole and have a beer. That's what I did. (well, I had a couple beers) The top Lic plate bolts are LED lights:

[Edwardo]

Or just a piece of 90 degree angle aluminum. Drill and mount.

[KillBill]

Bring two dollars to home depot and buy two L-Brackets

done


BTW -- were you hanging from a tree when you took that first picture?

[DBConz]

Originally Posted by KillBill

BTW -- were you hanging from a tree when you took that first picture?

nope. upstairs on my deck, but i like the tree idea.