Chromed tank sides??

[soloithtz]

Anyone know where to find chrome colored tank sides ie, the black plastic pieces just underneath my tank? Been searching all over the net with no luck !! Anyone??

[TimmyB]

send a PM to Uncle Snake.

[brendanp]

Just ride the fucken thing will you. Or try www.blingmaster.com

[Jimmy 2 Shots]

Wirelessly posted (BlackBerry Curve: BlackBerry8330/4.5.0.131 Profile/MIDP-2.0 Configuration/CLDC-1.1 VendorID/104)

Are you talking about chrome frame sliders?

[OreoGaborio]

Originally Posted by DBKromz

Are you talking about chrome frame sliders?

Think he's talkin about the black plastic piece that fills in the gap between the frame and the gas tank.


I've never seen any... it'd probably be a little tricky to fab those out of metal & have em plated.

Dunno if it'd look decent or not, but your best bet would probably be to paint it w/ that chrome paint

PS... folks... I have no problem giving Jim shit about his chrome... but I'm not about to give shit to a new member that just signed up & only has 3 posts that I don't know personally. I just deleted a handful of posts because I don't think that kind of bs belongs on NESR. If anyone has a problem with me deleting their post in this thread feel free to PM me and we can discuss it off board.

[legalspeed]

Originally Posted by soloithtz

Anyone know where to find chrome colored tank sides ie, the black plastic pieces just underneath my tank? Been searching all over the net with no luck !! Anyone??

I'm sure you know, but I'll say it anyway; the chrome stuff you see on sportbikes is really just polished aluminum, frames, subframes, rims, etc...

So, if the panels are aluminum, buy an extra set and strip off the paint, then send it out to be chromed or polish it like the rims.

Someone give Petey a hug.

[Hauptman]

I doubt the panels are going to be metal. I think chrome paint is probably your best bet but if you want to chrome things I'd stick with the big stuff...swingarm, wheels, chrome grips if you want em I guess. Chrome just seems like a lot of work and extra weight on the bike.

[Jimmy 2 Shots]

Wirelessly posted (BlackBerry Curve: BlackBerry8330/4.5.0.131 Profile/MIDP-2.0 Configuration/CLDC-1.1 VendorID/104)

oreo

[brendanp]

Pete., you dont have to give shit to a new member here about that stuff//// that's what we are here for! hahaha. did you delete my post biotch?
Do I have to pm yer ass? anyway, welcome to NESR man. Feel free to ask Jim all about the chrome sheet!

[OreoGaborio]

No hard feelin's

[brendanp]

Pete, hopefully you will graduate to ADMIN here and you wont have to be soo politically correct, and you'll be able to just drop da Hammer!! haha

[Pigman]

They can chrome plastic parts all day long......I am sure either gator customs or the place in ME will do it, seeing as there is a full chrome busa and r1 out there. Also my cfr had full chrome plastics on it.....just be carefull when u take the lives off you don't snap the small tabs

[Sheppo]

Originally Posted by OreoGaborio

Think he's talkin about the black plastic piece that fills in the gap between the frame and the gas tank.


I've never seen any... it'd probably be a little tricky to fab those out of metal & have em plated.

Dunno if it'd look decent or not, but your best bet would probably be to paint it w/ that chrome paint

PS... folks... I have no problem giving Jim shit about his chrome... but I'm not about to give shit to a new member that just signed up & only has 3 posts that I don't know personally. I just deleted a handful of posts because I don't think that kind of bs belongs on NESR. If anyone has a problem with me deleting their post in this thread feel free to PM me and we can discuss it off board.

bastid. I was giving Jim shit... I'm OK with it if you buy me a beer...