[Zero]

Anyone that has had this done have an estimate on what it should cost? Mid/Full size truck - Toyota T100. It looks like there is a dealer not too far away from me in MA. Any other suggestions or alternatives? I have a bedliner now, but had been thinking about getting this done for a while now.

-Dave

[tonyd]

I paid about $500+- for a linex in my Titan in 2005. I think it was Linex of NH in Bow, NH that did it. Quick and easy, only took them about and hour.

[Degsy]

I had mine done in West Bridgewater, MA. Awesome job, looks great 3 years later. I paid $400 for my Dodge Ram to be done.

MAKE SURE YOU GET IT OVER THE RAILS!!! Then you can stand on the bed rails and not damage them.

If you go to the line-x web site, they used to have a money-off coupon.

derek

[Zero]

It will definitely be over the rails as the liner has worn away a nice line of paint already. The T100 bed has a nice line in the sheetmetal about an inch from the top so I think that would work out nice. It's not something I need at this point just thinking about it. I've had the truck for 8 years now and don't really think I would get rid of it as it is a good truck.

-Dave

[rjh200]

Originally Posted by Zero

It will definitely be over the rails as the liner has worn away a nice line of paint already. The T100 bed has a nice line in the sheetmetal about an inch from the top so I think that would work out nice. It's not something I need at this point just thinking about it. I've had the truck for 8 years now and don't really think I would get rid of it as it is a good truck.

-Dave

I have it and personally would not go without it in any truck. Plan on spending between 350-500 depending on where you go. Shop around as the prices do vary.

[keeena]

Linex is the best liner out there IMO...hands down. Looks like I overspent a bit compared to what some of you guys paid...$550(?) over the rail.

+1 over the rail. They normally only go just a tiny bit past the top (flat) part. I asked them to do it down to the top of the tail light and cary the line all the way down the bed. Why the hell not, right? Looks good. The cost was the same (was quoted the $550 before I mentioned this change). Most of the labor ($$) is due to prep/masking...the guy said he could care less how far down I went. Let me know if you want pix. Its a Chevy 1/2-ton.

I have a referral coupon for $10 or $20 if you want to go to Marlborough MA. There may be subtle differences between shops...meaning how meticulous they are. Guys in Marlboro removed my tailgate and sprayed the back part of the bed (behind gate that runs down behind bumper). Not sure if all shops are as attentive to detail. I'd mention that you want them to go on thick (except where clearances are an issue) and that you don't want overspray, etc..

I've used Marlboro MA and Hudson NH shops before.

[schleppy]

I had the Ameraguard liner put sprayed into my Ranger (Sprayed Bedliner Protection and Polyurethane Protective Coating by Ameraguard). They spray it in hot unlike Line-X, so the bond is (supposedly) a lot stronger. There are a ton of color options, thicknesses, etc. So far it's held up to all the crap I drag over it VERY well, not a single blemish.

This is the place I went, the guy did a fantastic job and charged reasonable prices. He will also fix any scratches or gashes in the liner should anything ever get through it (lifetime warranty):

Peabody - Ameraguard of New England
14 Spring Street
Massachusetts
Phone: (978) 538-9988

[rjh200]

Well don't go by my cost, my cousing owns a shop that does it so I got the family discount for 275.

[GMAN226]

does he have any interest in doing an NESR discount. I need one as well...


G-man

[hammadown]

Linex definitely the best mod i've done to my truck. It took dropping my quad an the rear sproket digging in to cause a small ding in it. The guy that sprayed it said he'd touch it up for free. I had mine done in Maine, about the same price as everyone else.

[PinHead]

Any line-x dealers in the Norwood area? I'm in. My bedliner is totaling my paint.

Found one in Norwood, 781-769-3888

[skiierx]

Originally Posted by GMAN226

does he have any interest in doing an NESR discount. I need one as well...


G-man

I'd be interested in this if he could work a deal too!

[TheIglu]

Same here, my over the rail sucks my balls.

[mycirus]

Originally Posted by skiierx

I'd be interested in this if he could work a deal too!

Jamie on what, did you ditch the saab???

[rjh200]

I can talk to him and get a price. He rides also so I could just point him to the site. His shop is in Maine though.