![]() | ![]() |
| Home | Gallery | Classifieds | Arcade | Store | Privacy | Support Us | ![]() |
| |||||||
| | Welcome to New England Streetriders! You are currently viewing the site as a guest which only gives you limited access to most features. These ads do not show to registered members. Register Now, it's FREE! |
![]() |
| | Thread Tools |
|
#1
| ||||
| ||||
front sprocket for sv650 neededanyone got a 14t front sprocket for a 1st gen sv650 I can borrow/try or buy? |
|
#2
| ||||
| ||||
front sprocket for sv650 neededDon't do it ... you will beat your chain all to hell. That is an awful tight radius for the chain to go around. Everyone that has done it at SVRider has swapped it back within a month or so. This last guy that did it actually had damaged and missing rollers on his chain which made no sense whatsoever. Chains are more money than sprockets ... go up in the rear instead. |
|
#3
| ||||
| ||||
front sprocket for sv650 neededQuote:
|
|
#4
| ||||
| ||||
front sprocket for sv650 neededChad's resorting to dire methods trying to lose race weight! J/K Chad, I might have access to one, I'll check later today..... |
|
#5
| ||||
| ||||
front sprocket for sv650 neededI'm running a 14 tooth on my dirt bike with a regina chain. No problems with rollers here. KB |
|
#6
| ||||
| ||||
front sprocket for sv650 neededok, anyone have a 46t rear sprocket then ? |
|
#7
| ||||
| ||||
front sprocket for sv650 neededdont listen to them chad. drop a tooth in the front.... just like i said. the 14 that is on my bike has been on there since i bought it in 01....with no chain problems. drop the tooth and maybe it will pull out of the bowl instead of chug Last edited by SVRACER01 : 05-28-07 at 12:40 AM. |
|
#8
| ||||
| ||||
front sprocket for sv650 neededserious?!?!?? no wonder i always pulled you on the front straight with the YZ?!?!?! |
|
#9
| ||||
| ||||
front sprocket for sv650 neededmy stock is 15/45, what is your s model 14/45 ? |
|
#10
| ||||
| ||||
front sprocket for sv650 neededim running 15/45 on my sv, no issues. where are you having problems and what times are you running? |
|
#11
| ||||
| ||||
front sprocket for sv650 needed14/44? maybe a 45 i can look at it when i go up there. just buy one they are less than $15. |
|
#12
| ||||
| ||||
front sprocket for sv650 neededhes doing :25s maybe less sometimes, but i rode it for a few laps last weekend and it just seemed to lug. notably out of the bowl. i told him to drop a tooth in the front for a little more drive out of the bowl. besides. its very rare that i see 6th gear. you could probably lower the gearing significantly for NHIS. |
|
#13
| ||||
| ||||
front sprocket for sv650 neededQuote:
unfortuneatly I can't afford to build the motor so a $20 sprocket I shall try! |
|
#14
| ||||
| ||||
front sprocket for sv650 neededsince all you track/race sv guys are here maybe i can ask a semi related question. Maybe its because i'm still new to the track and a slower rider but entering the bowl i'm dump it to 2nd and find myself having to shift as i'm exiting while leant over. Am i wrong to downshift to 2nd? Or is it indeed from crappy gearing from suzuki? Sorry to jack your thread. |
|
#15
| ||||
| ||||
front sprocket for sv650 neededany idea where its jetted at (im guessing its old enough to be running carbs)? if its breaking up i would think it has more to do with air/fuel than it does not being built or pulling too much weight. granted everyone else is right, sprockets are a cheap change and could get you where you want to be but im not sure if thats actually fixing the problem. if you're at tonys on the 7th and want to swap bikes for a lap or two thats cool. |
|
#16
| ||||
| ||||
front sprocket for sv650 neededQuote:
|
|
#17
| ||||
| ||||
front sprocket for sv650 neededthere VERY well could be a fueling issue also (jetting, sync ) but i didnt feel any breaking up it just felt.......blah. it really felt like iin the wrong gear. id really like to ride it again . |
|
#18
| ||||
| ||||
front sprocket for sv650 neededQuote:
|
|
#19
| ||||
| ||||
front sprocket for sv650 neededOk, so this whole damn time i'm entering the corner at a damn crawl pace?!? But thanks for the info guys, i'll be trying that out on the 7th i hope. |
|
#20
| ||||
| ||||
front sprocket for sv650 neededas PK once told me "just go faster. brake harder and later and get on the gas as soon as possible.the throttle on that should just be an on/off switch. its an SV. if it tries to do something you dont want it to just tell it NO!! and force it" |
|
#21
| ||||
| ||||
front sprocket for sv650 neededI do the same with the hawk! I got faster by letting go of the brake earlier. It really worked! |
|
#22
| ||||
| ||||
front sprocket for sv650 neededi know i run the bowl in 4th, but i also know as a novice i ran it in 3rd until i saw the light. duey if you will be there on the 7th. look me up, white sv, yellow plates, #165. on a track day i run yellow or blue group, which ever has the smallest crowd so we can talk off track or if we are in the same group we can go follow the leader. |
![]() |
|
| Thread Tools | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| EX500 front sprocket torque spec | wylee | General Bike Related | 3 | 04-14-07 03:28 PM |
| SV650 modding, pro. jetting needed. | Qfactor | Bike Maintenance | 5 | 03-27-06 03:13 PM |
| Should I drop the front sprocket 1 tooth? | bara954 | General Bike Related | 17 | 08-05-05 05:38 PM |
| front sprocket/countershaft question | trackdog | General Bike Related | 6 | 08-05-04 10:28 PM |