[Kitt]

Hey guys, I'm making some frame sliders up for my bikes again (yea, I may have used one or two... but i gave a lot away too!). I wanted to add a little style and functionality, so I added "ribs" into the sliders. They look "cool" and they act as break-off points that hold up in crashes, but in theory, will snap before snapping engine mounts and bolts.

I make 2 lengths: 2.5" and 3.5" (I used the 3.5 with my street plastic to help protect the bodywork... and 2.5 with race bikes, to reduce chance of snapping or bending bolts/mounts)

I will also be making similar style swingarm spools.

Not trying to get rich, making them for the team, figured i'd extend the offer to anyone who wants to try them out.


$30/pair for sliders
$15/pair for spools







If you want to see any "tested" parts, come see me in the pits

[slutty dave]

I will attest that these work GREAT, kick a$$ price as well

[Crash Dummy Denno]

bring some extras up please - id like to see if they'd fit the 675 GB racing mounting bracket - got any pics of used ones -seems like a great idea!

[Kitt]

Originally Posted by Crash Dummy Denno

bring some extras up please - id like to see if they'd fit the 675 GB racing mounting bracket - got any pics of used ones -seems like a great idea!

no, they are on our bikes still haha.

also - the "break-off" groove (center rib) on the new design is deeper than shown, so that it's a thinner wall, and the Delrin knows where to snap.

[Crash Dummy Denno]

Originally Posted by Kitt

no, they are on our bikes still haha.

also - the "break-off" groove (center rib) on the new design is deeper than shown, so that it's a thinner wall, and the Delrin knows where to snap.

try to keep the gloves up

[GNTurbo6]

My sliders cost twice as much

[SVRACER01]

i need a really long bolt to go with those.

[Kitt]

Originally Posted by SVRACER01

i need a really long bolt to go with those.

McMaster Carr is your friend.

I haven't made this run of them yet... just gauging interest... if you guys want some, let me know. If you need extended hardware, i wouldn't go bragging about it, but i can track that stuff down too..

[SVRACER01]

Originally Posted by Kitt

If you need extended hardware, i wouldn't go bragging about it

im not sure what that means :squinteyes: but i think youre making fun of me.

SV sliders use the center mounting bolt which runs through the whole motor and out the other side.

[Kitt]

Originally Posted by SVRACER01

im not sure what that means :squinteyes: but i think youre making fun of me.

SV sliders use the center mounting bolt which runs through the whole motor and out the other side.

ahh.. that's REALLY long... give me the thread size and the length you need, i'll see if I can track it down.

[The Magician]

these sliders are damn good... i'll need a set too kitt