Yamaha YZ450 SuperMoto set up

[R7]

I bought this kit and had it on my 2008 YZ450 for a season and a half, then sold that bike and put them on a 2009 WR450F. I don't use/need the SM parts anymore. The front wheel/brake set up is NOT a perfect match to a WR. If you have a WR and are interested, I'll explain, no need to until that point.

17" SM black Excel wheels on Talon gold hubs.
Front wheel is 3.5 x 17
Rear wheel is 5 x 17
All spacers included for a YZ
Michelin SM pregrooved slicks with 2 trackdays and maybe 100 street miles on them. Front is 12/60 -17, rear is 16/63 - 17
Rear wheel has a 42 tooth steel sprocket, not sure of the brand but it's in very good condition. Also has a MotoMaster rear brake rotor.
MotoMaster complete race front braking kit, 320mm wave rotor, 4 piston calliper with relocation bracket, Stainless line, and a Motomaster master with lever and reservior...I don't remember the mm size of the master, but it has a D12 stamped in the side.
I also have a white SM front fender and a gold wrenthal non o-ring chain in great condition.

Everything is in great condition IMO, but there are a few normal nicks and minor scratches in the wheels from use.
Located in RI, cash and you pick them up. I don't want to deal with shipping or any type of checks.

$1,500.00 OBO

[lopycam]

Sweet setup!

Does this mean the wr is for sale?


Mark always takes great care of his stuff.

[FriskyDingo]

and put them on a 2009 WR450F. I don't use/need the SM parts anymore.

no more SM? buying something new I hope? no more SMs in RI, I'll have to haul my ass across CT to ride with the SMJ guys.

GLWS

[R7]

Sweet setup!

Does this mean the wr is for sale?
Mark always takes great care of his stuff.

Ahh, it is not for sale, sorry

no more SM? buying something new I hope? no more SMs in RI, I'll have to haul my ass across CT to ride with the SMJ guys.

GLWS

I only rode the SM a handfull of times last season, one of them being when we got your's stuck in the mud With the puppy on the way and a few home projects planned, there's no way i'll have time to ride that, along with the others. Nothing new in the plans yet

[R7]

Bump
It is best offer...

[wheelieman14]

PM sent

[theothersean]

[QUOTE=R7;1138703]Ahh, it is not for sale, sorry


funny how things work out .

[lopycam]

Good for you.

[quote=theothersean;1147470]

Ahh, it is not for sale, sorry


funny how things work out .

[R7]

I never posted it forsale, it was one of those bikes that had a dibs list and I went down it in order dibs were called.
You were next to get the message
Now about the R1??

[R7]

bump

[th3_d0c]

If you have changed your mind about shipping - I'm interested.

Over in San Francisco area (Foster City, zip 94404).
send me an email: rgehring [ratATat] gmail and we can figure it out.

**I don't ever come on this site and found this setup from a google search.

Thanks!
Rob.

[burnham]

How would I figure out what it would take to mount these on my 2011 husky?

[th3_d0c]

**Never mind, just realized Motostrano is down the street from me. Ha.


burnham,

You need to see if your axle will fit in the hub. And you will probably have to buy spacers.

So research the bearing inner-diameter on an 2006 YZ450 and same with your Husky.

Then find out the hub width of both and go from there.

If the bearings are different, just pop out the YZ ones and replace with bearings with the same OD, but Husky ID.