[FireFly]

Got a question. how tight can a damper clamp be on the forks before damage is done to the fork tube?? ( ft. lbs.) Or How tight should the clamp be? Is it the same as the triples? Thanks

[gmdboston]

Originally posted by FireFly
Got a question. how tight can a damper clamp be on the forks before damage is done to the fork tube?? ( ft. lbs.) Or How tight should the clamp be? Is it the same as the triples? Thanks

depends on the type of fork, coventional forks can be fairly tight. Inverted should be no more than 12 lb-ft on a 6 mm bolt.

[FireFly]

Thanks Pete. BTW, I was referring to a set of stock F4i forks.