1gen SV Parts Best Offers.. & Suzuki Track pastics CHEAP!

[Half Squid]

So this is the revised list of what is left of the bike. Best offers considered as I would like this gone!

Everything is available until I mark it off as SOLD.
If it's not listed here, I have already sold it, or do not have it available.

Frame with a clean title $300
Swing arm assembly with axel bolt and frame bolt, and wheel adjustment assembly. $75
Front cyclender head assembly without cover. $100
Entire front assembly - Forks with Tripple tree assembly axel. For "S" model $250
Coolant Resivour Tank with cap and mounting hardware. $15
Brake side clip on available for $25
Odometer assembly with 12K showing $100
Kick stand with switch harness. $40 SOLD
Windscreen $30
Lights control assembly with wiring $40 SOLD
kill switch control housing/Wire $40 SOLD
Front brake rotors $100 SOLD
front and rear stock sprockets $50
Front brake calipers with pads and brake lines for the pair. $100 SOLD
Rear brake caliper with brake line/ reservoir $45
Headlights one piece of housing/mounting tab broken but repairable and stays very secure when used in front cowl assembly. Lights are 100% functional. $35
Front flush mount directionals $10 SOLD
Transmission internals (Gearing, all in very good shape, motor only had 12K on it) $50 SOLD
COIL ASSY,IGNIT $45
RECTIFIER ASSY $75
RELAY ASSY,STARTER $40 SOLD
STATOR ASSY $75
Cams $50 - I was informed by a member here exactly what cams I have.
Seems the upgrade was done to my 2nd gen motor!

So what I have is.
99-02 SV650
"B" -EXF. (Exhaust front)
"D"-EXR. (exhaust rear)

03+ SV650
Qty of 2 "J"-EXR (Exhaust Rear)


Throttle cables $35 SOLD
Directional relay $10
White acerbix aftermarket streetfighter light assembly that is 100% functional and good condition. $25 SOLD
Evap system $15
Starter clutch $20 Shipped

[Sheppo]

kill switch control housing/Wire $40

can you tell me what wire colors ? Maybe a pick sent to sheppo<sixone> @ gmail dot com

[SCRLT01]

Pm sent....

[Half Squid]

Sheppo, I will email you a picture tomorrow.

Jesse I responded to your PM.



Mike

kill switch control housing/Wire $40

can you tell me what wire colors ? Maybe a pick sent to sheppo<sixone> @ gmail dot com

[frenchy21]

is the bodywork for an 06 gixxer 600?

[Half Squid]

I worked out an arraingement with the buyer of the plastics, he agreed to pay more to help cover shipping costs!

These are TL race plastics

[Half Squid]

UPDATES: This is what remains, Prices reduced to move.
Local pick up preffered for Frame, but if your willing to pay the bulk charge for shipping then I will do it.
Prices do not include shipping costs otherwise.

Everything is available until I mark it off as SOLD.
If it's not listed here, I have already sold it, or do not have it available.

Frame with a clean title $300
Swing arm assembly with axel bolt and frame bolt, and wheel adjustment assembly. $75
Front cyclinder head assembly without cover. $70
Entire front assembly - Forks with Tripple tree assembly axel. For "S" model $250
Brake side clip on available for $20
Odometer assembly with 12K showing $75
"S" Front cowl/Side cowling W/Flush mount directionals, sold as set $100 SOLD
Fairing stay assembly $50
Kick stand with switch harness. $25
Winscreen $25 (One lower tab broken, but screen stay in place snug without movement, light scratches on screen)
Lights control assembly with wiring $40
Front brake rotors $100
Front brake calipers with pads and brake lines for the pair. $75
Rear brake caliper with brake line $25
Headlights $35 (Damaged, lens and internals are good)
transmission / gear box / main shaft $45
RECTIFIER ASSY $75
RELAY ASSY,STARTER $40
Evap system $15
Starter clutch $20 Shipped
STATOR ASSY $75
STARTER STARTING MOTOR $20
Starter Relay Solenoid $20
AIR VALVE SWITCH $15
Horn w/ Bracket $10
THERMASTATE $15
OVER FLOW TANK $15
Throttle cables $35
Passenger pegs $75 for the pair
Directional relay $10
CYLINDER HEAD BOLTS FRONT & Rear $15
IDLE AJUSTER PLATE $5
Rear Caliper Mount Bracket Strut Bar $10


White acerbix aftermarket streetfighter light assembly, 100% functional and good condition. $25Cams $50 - I was informed by a member here exactly what cams I have.
Seems the upgrade was done to my 2nd gen motor!

So what I have is.
99-02 SV650
"B" -EXF. (Exhaust front)
"D"-EXR. (exhaust rear)

03+ SV650
Qty of 2 "J"-EXR (Exhaust Rear)

[Half Squid]

Bump..
Added a few parts I found, also lowered some prices.

[Half Squid]

Bike is completely torn down ready to find a new bike to be a part of! Any reasonable offers will most likely be taken.

[Half Squid]

Bumped,

Make offers, want these parts gone!

[THE STUFF 187]

I need speedo, race bodywork & gas tank asap.

[Half Squid]

I have the Speedo from the 2002 with wiring which tie into the Main Harness.
I have a few tail sections I can let one go, the rest are part of the package deal with the 01 SV I am selling.
Did you find the forks/frame already? Title is good/clean.
I do not have a tank.

[nhbubba]

It might help if you cleaned up the first post to cut out the stuff already sold. I know you marked it sold.. but I'm slow and find it confusing.

[Half Squid]

Bump, Any Best offers will be considered

[THE STUFF 187]

Do you know if speedo will work on a 2003? How much for front end = forks,trees,calipers, front rotor? If a good price I can pick stuff up on my way home from Loudon today after 5pm when I leave

[Half Squid]

The stuff 187

I sent you a PM.

Call or text me.
I am home.

We'll work out a deal we both can live with.

[Half Squid]

HUMP DAY BUMP!

[Half Squid]

Bump... First page list updated