2004 Honda CRF450R

[loudbeard]

Price: $4,500
Location: Rehoboth, MA
Hours: Just a shakedown run

Complete engine rebuild by Jason Perry @ Motorods. All OEM Honda parts.
Complete chassis service, all bearings serviced and or replaced.
Barker full stainless steel exhaust.
Full carb rebuild with JD Jet kit (only ethanol free fuel since rebuild)
Motion Pro Rev 3 throttle and cables.
IMS 3.5 gallon fuel tank.
Myler’s Silicon radiator hoses.
Suspension setup for woods by C-Cycle for 200-220 pound rider.
Hammerhead adjustable brake and shifter levers.
Galfer braided steel brake lines.
Pro Taper EVO Woods High bars.
Enduro Engineering bark busters.
Devol skid plate and radiator guards.
IMS Foot Pegs.
TrailTech Endurance II.
18” rear wheel from CRF450X.
Pirelli MT16 with good life, UHD tubes.
New Tusk 520 X-ring chain.

Includes stock 19” rear wheel, stock fuel tank,

Also includes set of RSW Racing offset triple clamps for supermoto (new.)






Sent from my iPhone using Tapatalk

[loudbeard]

[loudbeard]

Come on down and have a look this weekend, you will not find a better used dirt bike on Marketplace regardless of the year. This was stripped all the way down to bare frame with no detail overlooked in the reassembly process.

[loudbeard]

Is there no one here (wo)man enough to ride a 450R in the New England woods?

[Paul_E_D]

Is there no one here (wo)man enough to ride a 450R in the New England woods?

No. No, there is not.

[loudbeard]

Damnit. Well that does it, 1 like and I’ll turn this thing into a supermoto and keep it for track days.

[csmutty]

Damnit. Well that does it, 1 like and I’ll turn this thing into a supermoto and keep it for track days.

I gave you a 2nd like so you can't do it.

[loudbeard]

Hah!

We’ll see how it goes. No chance I’d take less than 4 bands for it. It’ll sit up for sale until the end of the year, if it doesn’t go, it’ll get a set of 17s.

[nhbubba]

I still have a set of sumo wheels for a WR450F with Tallon hubs tucked in the shed somewhere. I think dubya may have kits to convert to other fitments. Will make you one hell of a deal. ... Or they are going on my next dual-sport. One of the two.

[loudbeard]

I still have a set of sumo wheels for a WR450F with Tallon hubs tucked in the shed somewhere. I think dubya may have kits to convert to other fitments. Will make you one hell of a deal. ... Or they are going on my next dual-sport. One of the two.

Love this idea. I’ll need to do a bit of homework to check fitment and if I can get a spacer kit to work for the Honda, but I’ll take em if they’ll fit. What year WR are these for?

Also, JC has a set of forks and shock that are internally shortened and setup for road racing for my bike. He raced an ‘04 for quite a while. I’m sure they’ll need a refresh, but this thing is shaping up neatly.

[nhbubba]

Wheels were on a '12 WR450F. Will PM.