owww. my best is a good shot of carb cleaner in the eyes. lesson learned.
Printable View
owww. my best is a good shot of carb cleaner in the eyes. lesson learned.
Mmm... hot tea anyone?
haha. that was one day i wish mike had an eye wash station in the garage.
hahaa, need a wrenchers mishap thread.
I pulled the fuel line off a 72 Honda XL250 and got gas straight in my eye...I feared for my vision
Thanks for the all the tips. I went through the bike last night and made a list; mainly small dollar items. New air filter, brake lever, piston, and grips. I may bore the cylinder 0.010" over to clean her up a bit. Going to take a trip to Souhegan Valley Motorsports today and show them the cylinder to see what they think. Maybe I'll get lucky.
Fitz
Alex, I'll take "put a piece of safety wire through my finger" for 200Quote:
Originally Posted by typeone
That hurt.
You don't generally bore modern 125s. THey have nikasil plated cylinders. There's no material to bore really.
These cylinders last a good many hours though. If it's bad, you just get it replated. TThey do technically bore it a TINY bit for this process, recaot with nikasil. Costs about 200 bucks.
Wirelessly posted (BB Tour: BlackBerry9630/4.7.1.40 Profile/MIDP-2.0 Configuration/CLDC-1.1 VendorID/105)
Also, motosport.com is your friend. They have almost everything you need and at pretty good prices.
Good to know. Thanks.
Fitz