0
![Not allowed!](https://www.nestreetriders.com/forum/images/buttons/down_dis.png)
![Not allowed!](https://www.nestreetriders.com/forum/images/buttons/up_dis.png)
I’m looking to have some graphics copied and printed. The idea is to get an exact match, from the colors, texture, and size of the originals. I do not have an original graphic to lay flat and copy, it would need to be copied from the actual tail section. Cost isn’t a concern, getting an exact match is a concern. I’m looking to copy the R7 OW-02 decal, and the red stripe decal.
Any recommendations on someone/someplace I can bring this tail section to and copy these decals?
Thanks
![]()
Yamaha
I would try gagnon sign in danielson, CT. https://www.gagnonsign.com/
Family owned business that does excellent work. The family is big into motorcycles and would love to help with this if they can. They put together a Baja team years ago.
https://www.norwichbulletin.com/stor...e/32934201007/
-Christian LRRS/CCS HasBeen ECK Racing
2011 Pit Bike Race CHAMPION!
I should be able to design it for you, but I can't print on "durable" decal material. But you could easily take the file I set-up to any sign shop or large format printer to have them printed & contour cut on the material you'll need. May be a good excuse to finally get back down. But I'd likely need to take the tail piece with me. Wait. I mean the tail piece from your bike. Obviously the other tail piece will be with me...
![]()
Did you grit your teeth and try to look like Clint Fuckin' Eastwood?
Or did you lisp it all hangfisted like a fuckin' flower?
Did you grit your teeth and try to look like Clint Fuckin' Eastwood?
Or did you lisp it all hangfisted like a fuckin' flower?
If you absolutely can't be without the tail piece, we can make arrangements to meet at my shop in Manchester. At worst, I can get a general idea and from there we can make necessary adjustments "remotely". Of course, from Manchester we all go up to the One Zero and act like idiots for the night.
Did you grit your teeth and try to look like Clint Fuckin' Eastwood?
Or did you lisp it all hangfisted like a fuckin' flower?
Reese at REB Graphics in Schenectady, NY helped me out with a somewhat similar request a few years ago. He does get very busy with outfitting Moto America and NEMRR racers with their graphics but he may be willing to help you out with this seeing as it is a pretty cool bike to be reproducing graphics for. It's a bit of a drive for you but might be worth the trip if he can help you.
https://www.rebgraphics.com/