Project: Grom 2.0

[Jim]

took it out for a ride yesterday evening and made a mental list of things to adjust.

- moved the brake line as the angle was not smooth. then had to bleed the brakes again.
- loosen header pipe and twist it to see if the muffler can go higher.
- drill a new hole on the exhaust hanger from above
- tire pressures are low and need air
- tighten chain more
- dash needs to learn all 6 gears. currently only learned 1-4.

other than that, it's good. just need to keep adding miles for the autotune to make a map

[butcher bergs]

Soooo......Super Street?

[Jim]

Soooo......Super Street?

i did a follow up last night for them to check with the peeps in charge if they're ok with it. the key is for them to say CBR300 and not Grom.

i have fresh tires and angled valve stems to put on at NHMS. also just got a new pitbull mini front pin stand for the bike, thanks to Boston Moto.

all i have left is to get 200 miles on this bike so the aRacer will make a map.

[Jim]

MotionPro Rev3 kit and kill switch ordered