http://www.tdctuning.com/testrun.jpg
Printable View
This is mine from my 87GT done at the Dyno shop in Concord.
I'd be down for this, I want to see if my bike is really pulling what the guy i bought it from said its pulling.
I'd be interested in getting my Mustang Dynoed before i starte modding it...
So where exactly is South Canuckistan? :twofinger
I may make a trip with my 95 Z28 vert. It's basically stock except for a cold air kit.
Planning on upgrading the shitty LT1 calipers to the LS1 style. Can I do a reverse dyno and see how much braking power I gain? :lol:
Southern canuckistan is Hooksett NH
:-)
:fairy:
so about how long does it take to remap a pc3 on the dyno? can you possibly do 2 bikes in an hour?. are you waitin till the weather turns to set a date??
i can do one bike per hour
usually
im awaitng the delivery of the dyno to set a date (apr 1 i think)
is this still going to happen next month??
yep
the dyno is almost finished!! under 14 days till delivery
YAY!!
onec its in the shop ill let you all know
awesome cant wait. 2 weeks should be perfect, hopefully the weather will really break by then.
DATE SET
April 24TH
unless somene has a better Idea
People coming :
Graffix31 (2 bikes)
Joberly
I will probably be gettin a hold of you early in the summer once I get my jet kit in but end of this month is a no go for me. Good luck.
As long as the weather holds I am definatly in.....
i say you dyno my bike for free so you can calibrate it :D
i MAY be down for this, i'll let cha know
i prefer not to put muddy low hp broke bikes on my new dynoQuote:
Originally posted by OreoGaborio
i say you dyno my bike for free so you can calibrate it :D
i MAY be down for this, i'll let cha know
i mean shit u may fall off it while strappin git down !!!
:fairy:
O_o
:dunno: :chair:
(cheap shot!)
:twofinger
Whats the cost for this Dyno day?
:lolup: Looks like the season's been extended!Quote:
Originally posted by svridah03
i prefer not to put muddy low hp broke bikes on my new dyno
i mean shit u may fall off it while strappin git down !!!
:fairy:
O_o
:dunno: :chair:
(cheap shot!)
depends how long we tuneQuote:
Originally posted by Piper33U
Whats the cost for this Dyno day?
1 hour with tuning should be about $125
That's a race weekend:dunno:Quote:
Originally posted by svridah03
DATE SET
April 24TH
unless somene has a better Idea
People coming :
Graffix31 (2 bikes)
Joberly
Can you dyno my truck? According to the chip tuner, I should be around 600 ft./lbs. and 400hp.
I'd bring the R1 too.......:dunno:
we can do bothQuote:
Originally posted by highsider
Can you dyno my truck? According to the chip tuner, I should be around 600 ft./lbs. and 400hp.
I'd bring the R1 too.......:dunno:
4wd truck ?
I might swing in to say hello seeing as you're so close. No dynoing for me though, my bike's too fast for me already :redface:
Might have to give you a call once I'm finished with the e-cripz turbo swap tho, seeing as you've got one of them all wheel thingamajobs.
Speaking of which, you should post up over at www.newengdsm.org, I'm sure you could find a few folks over there to patronize your new dyno.
How about if I just want to get the bike on there and get a few readings at half throttle, full throttle etc.?
I have a carbed bike and it takes about an hour just to change the main jets or pilot jets. I would just want a couple runs to see what the A/F ratio is and make corrections on my own time.
So this is a load dyno, correct? Not just a big hunk of round stock hooked up to a computer?