0


Wirelessly posted (BlackBerry Giggity: BlackBerry8330/4.5.0.131 Profile/MIDP-2.0 Configuration/CLDC-1.1 VendorID/104)
What fitting(s) do I need to use the air lines in the NHMS garages? I thought Oxx out up a thread last year asking this, but I cant find it.
I am curious about this as well... I keep borrowing Doucette's air hose and I think I'm on thin ice
![]()
Zip-Tie Alley Racing
LRRS/CCS #103
PPS | Dunlop | Boston Moto | Woodcraft & Armour Bodies | 35 Motorsports | Pit Bull | K&N
1/4" mostly, I think there is a 3/8" one kicking around in the center also.
1/4" quick/push connect right? The male side is on the hose?
Zip-Tie Alley Racing
LRRS/CCS #103
PPS | Dunlop | Boston Moto | Woodcraft & Armour Bodies | 35 Motorsports | Pit Bull | K&N
Save the trouble and get yourself a battery powered rechargeable air compressor.
ONe charge lasts like half my season and its great for at tracks where there is no air close by and at home. I think mine was like 30 bucks.
EVERYTHING is a repost
06 749R #0047
08 R 1200 GSA
13 Monster EVO 1100
bring both fittings and try them![]()
LRRS #399
MX #505
It's the most common one you can buy - at any tool coral... I mooch air also, but I LOVE having a portable can of air... They can be had for short $, and you don't need to get all tangled up with hoses throwing a little air in your tires..
Standard 1/4" fitting. Just about a bazzilion drops.
As of 3 days ago, there was even a chuck on the hose from the main compressor in garage #1. And yes, anyone can use that.
" In the name of the Spedo, the Tach and the Holy Throttle, Amen. "
ive seen 2 types of 1/4 in fittings. double bump and wide single bump. dunno if it matters
![]()
Last edited by daviid; 08-31-09 at 09:44 AM.
David King | ASRA/CCS/WERA SE EX #484
"Any society that would give up a little liberty to gain a little security will deserve neither and lose both."-Benjamin Franklin
Last edited by FireboltEric_MA; 08-31-09 at 01:32 PM.
Zip-Tie Alley Racing
LRRS/CCS #103
PPS | Dunlop | Boston Moto | Woodcraft & Armour Bodies | 35 Motorsports | Pit Bull | K&N
Eric is correct. One is automotive and the other is ? machine shop ? though I do not know which is which.
Why is this thread existing? I mean, Jim, really? You couldn't spend the 11 bux to get a variety of fittings?
You are just the cutest! I could just pinch your cheeks sometimes.