0
I've been riding without turn signals that aren't my hands since I got my bike. I brought my 95 zx7 into Durands and they 'couldnt figure out' what was wrong with the turn signal circuit. Since I don't have the cash for another two weeks or so for insurance on my bike I've been trying to fix them myself.
I pulled open the fuse box and of course the fuse was out for signals. I can't believe they charged me for labor and didn't even check the fuse.
I've spent a few hours today resoldering the ends since they were rugged. I hooked all the signals up, replaced the 10a fuse and had power to the signals. As in, power to all the signals. At once. They can be turned off by pressing in but all four stay on constantly. No blinkage.
A few other diagnostics:
The lights on the gauge cluster do not come on whatsoever with any signal button pushing, though the lights do.
The fuses are fine, both relay and fuse box.
Every guy with a bit of motorcycle knowledge says "probably the relay." But this was before any of them worked whatsoever. They are getting power but something in the circuit is wrong.
Any ideas for me to try?