0
![Not allowed!](https://www.nestreetriders.com/forum/images/buttons/down_dis.png)
![Not allowed!](https://www.nestreetriders.com/forum/images/buttons/up_dis.png)
I hope to purchase this bike from Scottie when he short sells it in a rush to buy his next Ducati.
Subscribed as I want to see how my bike is coming out.
Tommy D
- I miss turn 1 parties![]()
Send cash... I need a track day
Can you guys get me a couple measurements? Subframe mount points inside to inside. Top and bottom please.
Looking to put a different subframe on the Hawk and wonder of one of these would work.
"I'd rather ride a slow bike fast than a fast bike slow"
Bikes: Ducati: 748 (Track) Honda: RC31 (Race/street)/ CRF 110 Mini Moto/ Hawk Endurance Racer Kawasaki: ZXR1200R
BOMO Instructor
EX# X
Wirelessly posted (BlackBerry9630/4.7.1.57 Profile/MIDP-2.0 Configuration/CLDC-1.1 VendorID/104)
Subframe mopunts on the outside of the frame I believe. Ill get you measurements tomorrow. Wanna buy the subframe?Originally Posted by Doc
Right i want the inside measurement of the subframe mount points.
If it fits i might... Although I was looking at a race frame on Tygaperformance.com http://tyga-performance.com/site/pro...6bbaf1df52c2a7
If that fits the hawk I am buying it but i need to know if the measurements add up.
Last edited by Doc; 01-11-10 at 12:06 AM.
"I'd rather ride a slow bike fast than a fast bike slow"
Bikes: Ducati: 748 (Track) Honda: RC31 (Race/street)/ CRF 110 Mini Moto/ Hawk Endurance Racer Kawasaki: ZXR1200R
BOMO Instructor
EX# X
Just the inspiration I needed. Foggy on an NC-30 versus a 250cc 2-stroker (ridden by Jamie Whitham)... woooot.
http://www.youtube.com/watch?v=ylO8z...eature=related
LRRS Am #331
Graphic Tailor / Woodcraft / Armour Bodies / Suomy / Cycle Performance Autobody / Shorai / ChickenHawk Racing
Gino
HAWK GT Racer Expert #929
2012 CCS LRRS ULSB Champion
2012 CCS LRRS P89 Champion
2008 CCS ULSB National Champion
ECKRACING Bridgestone Street & Competition Woodcraft MOTUL On Track Media Pine Motorparts Vanson Leathers
Got a link?? I wasn't able to find it. As far as I know, it would be nearly impossible to get 88hp out of a stock-bore NC-30. If you go overbore then yes, the number is attainable.
I'd be very impressed with anything approaching 70 hp on a stock lower end, even with head work.
Guess we'll find out when mine's done
Over boar 450
http://mngforce.typepad.com/
"on paper- figured that we can raise our expectations even higher to reach over 100hp at the rear wheel"That would be just plain sexy......
You valves should look like this
![]()
Gino
HAWK GT Racer Expert #929
2012 CCS LRRS ULSB Champion
2012 CCS LRRS P89 Champion
2008 CCS ULSB National Champion
ECKRACING Bridgestone Street & Competition Woodcraft MOTUL On Track Media Pine Motorparts Vanson Leathers
Some crazy cad stuff going on here.
But I like the things gone bad section
SCOTT YOU GUYS MUST DO THIS>>>>>>>>>
All yours for $10,000
![]()
Last edited by nt650hawk; 01-14-10 at 01:43 PM.
Gino
HAWK GT Racer Expert #929
2012 CCS LRRS ULSB Champion
2012 CCS LRRS P89 Champion
2008 CCS ULSB National Champion
ECKRACING Bridgestone Street & Competition Woodcraft MOTUL On Track Media Pine Motorparts Vanson Leathers
Haaa, well nobody's heard from Mike at G-Force for a while now, I've sent some email inquiries and none yet returned. I don't have the coin for a full on SBK build, but man I'd love to get a hold of a set of those pistons to hold onto for when I do }:-)
I know I can get a solid, reliable 75 HP motor (433cc) built, but again... gotta do a rebuild at least once / year.... I'm not really up for that!
LRRS Am #331
Graphic Tailor / Woodcraft / Armour Bodies / Suomy / Cycle Performance Autobody / Shorai / ChickenHawk Racing
"I'd rather ride a slow bike fast than a fast bike slow"
Bikes: Ducati: 748 (Track) Honda: RC31 (Race/street)/ CRF 110 Mini Moto/ Hawk Endurance Racer Kawasaki: ZXR1200R
BOMO Instructor
EX# X