WTB: 06+ R6/R1 Front Brake Master cylinder

[GingahNinjah]

anybody got one on hand they would be willing to part with?? if it could be brought/gotten to the track for the upcoming TTD that would be great!!

[Pigman]

just as another option 300 will get you a Bnew 19RCS from ridersdiscount....FYI

[GingahNinjah]

i just need a new master that isnt as squishy as the GSXR one that is on my SV now. im used to a really tight front brake and the squishy gixxer one sucks

[Pigman]

Depending on your speed a R6 is better, slightly, but may have the same affect.... Thats why I went to the 19RCS is a rock and never fades.

[csmutty]

Depending on your speed a R6 is better, slightly, but may have the same affect.... Thats why I went to the 19RCS is a rock and never fades.

I've never gotten brake fade with a r6 master.

[Chippertheripper]

Accossato. It's good.

[GingahNinjah]

the 06+ R6 masters were made by Brembo

[Pigman]

the 06+ R6 masters were made by Brembo

and the 2011 GSXR 600 has the Brembo calipers on it, my 1998 SkiDoo Did also.....doesn't mean they are good LOLOLOL

[GingahNinjah]

it was recommended to me by a very reliable racer that i make the change from the gsxr to the R6

[Pigman]

Ok....forget what I said, I am just a NV slow guy anyways

[OreoGaborio]

GSXR NISSIN production was inconsistent... some solid, some mushy.
R1/6 Brembo was built to better tolerances but has different dimensions. 16mm bore instead of 19.

Both work well w/ SV calipers. Only a slight difference is in lever pressure and feel.


My Nissin was mushy... went w/ a 19x18 Accosatto.

[pontifex]

I have one for sale. Will post pics/details when I get home from work tonight.

I replaced it with a nisin. The R6 brembo was too spongy for me.

[Pigman]

I have one for sale. Will post pics/details when I get home from work tonight.

I replaced it with a nisin. The R6 brembo was too spongy for me.

This................

[OreoGaborio]

As I understand it...

The 16mm bore of the yamaha brembo requires more lever travel but has more mechanical leverage. Braking feel is through lever travel.
The 19mm bore of the suzuki nissin requires more force but doesn't travel as far. Braking feel is through lever pressure.


I prefer the charactaristics of the 19mm, however the 16mm brembo from the Yamaha is of better quality than the nissin off the Suzuki.

That's why i went with the Accossado.

[pontifex]

As I understand it...

The 16mm bore of the yamaha brembo requires more lever travel but has more mechanical leverage. Braking feel is through lever travel.
The 19mm bore of the suzuki nissin requires more force but doesn't travel as far. Braking feel is through lever pressure.

Yeah, that about sums up my experience with both. I like the feel of the 19mm bore better. Must be my manly hands

[csmutty]

Ok....forget what I said, I am just a NV slow guy anyways

If we want to pull that card I'm faster than you and I never got fade.

[Pigman]

Lololzzzzzzz...bahaha. Wasnt what I was saying but. I've had a few masters and break combos and pads, so going through them and now having a very good system I was just giving my feed back. But Rossi you can hook him up don't you have one..

[CBR929RE]

I never heard of the R6 ones being bad.

[kumpy]

I got an extra set I can bring, hit me up.

[Rada]

I never heard of the R6 ones being bad.

I had one that sucked donkey balls. I'm pretty sure that some sting and a couple blocks of wood wood have had better feel...

[GingahNinjah]

I got an extra set I can bring, hit me up.

Yeah Kumpy if you could bring it up with you that would be awesome. hoping to get it swapped out and get some practice time with it at TTD before the next round

[DaveZX6r]

http://www.hardracing.com/Brakes/Accossato.htm