WTB: Rear Exhaust Header 1st Gevn SV650

[Dayon]

Looking for a rear exhaust header for a 1st gen SV to complete a SuperSport bike build this winter. Thanks

[DuncanMoto]

I have a full exhaust header and muflers for $100 cash in Brighton.

[b0xmonkey]

Are you looking for a stock header or an aftermarket one?

[Dayon]

I picked up a Vance and Hines full exhaust off craiglist and am missing the rear header. I'm not sure if it uses the OEM rear header or not? The front headed does apear to be slightly larger in diameter.

[b0xmonkey]

I would think you would need a V/H header then? Might be a tough one but you might get lucky on EBay....

[wheelieman14]

I picked up a Vance and Hines full exhaust off craiglist and am missing the rear header. I'm not sure if it uses the OEM rear header or not? The front headed does apear to be slightly larger in diameter.

Normally, 1st Gen SV650 use stock rear header pipe (at least the M4 Full Exhaust I installed worked this way) with aftermarket exhaust systems.

[SVRACER01]

the stock SV header goes off the head about 6 inches or so then there is a connection to the rest of the pipe. usually the rear header (rest of it anyway) is attached to the knot of piping at the bottom where 2 becomes 1 and sometimes the front header is all attached as well, or they are set up like OEM.