It was falling apart

I gave the KTM a good cleaning today after last weekends Pachaug adventure and got a chance to inspect all the scares I gave the bike:redface: Nice big dent in the headpipe from a rock, no plans to fix that at this time..
The front axle nut took a beating and will need to be replaced, as it is now I'm sure I'll have to use vise grips to take it off..
Barkbuster brush guards are bent and scraped up...

I had also noticed a few times while riding last weekend that the kickstarter felt like it was skipping more than normal (it's had this odd skip sence the day it was new), well the bolt holding the kickstarter on was backed half way out:dunno:
I also noticed the bolt holding the kickstand was almost backed out as well.
I guess I need to take the bike apart and locktite everything:hmm:

I also installed a US forest aproved sparky and a quiet core today in the stock pipe. It now has a sparky but I'm not sure it's much quieter? It's advertised as making the bike at or below 96db.
That's all for now:)

only thing not yamaha and it falls apart....:dunno:

Only one thing to do and that is to sell it and buy a Honda!!

KB

Quote:

---

Originally posted by rmbbikes
Only one thing to do and that is to sell it and buy a Honda!!

KB

---

If I could get a YZ450f plated, this thing would be looooong gone:D
I've had 2 Honda quads in the past, both plagued with problems... never again:poke: :D

Sounds like your bike is taking a beating, you should see mine. It looks like its been thrown off a cliff, dragged down the road, buried in mud, and pretty much it has.
All my plastic is destroyed, hand guards are hammered, head pipe has dent. I've got shiny new radiator guards though, but that because I destroyed the other ones, along with a radiator. Millions of trees in the woods, sooner or later you'll meet one. Lets not forget I'm on my second clutch case cover,its got JB Weld sealing a crack, that reminds me I also need a rear brake lever too. I think it needs just about everything, might be cheaper to buy a new one.

Kevin

Quote:

---

Originally posted by R7
If I could get a YZ450f plated, this thing would be looooong gone:D
:poke: :D

---

I think they're coming, Husqvarna has them. KTM is rumored to have street legal 07's, I have also heard the 06's don't have clean C/O's. I'm sure Japan will be following the trend, Australia(sp?) already has CRF250X's ready for the street. Yamaha's WR's are ready for a extreme makeover, wouldn't that be nice to see them street legal next season.

KevinB

Mark all you need it to "rig" up the lights and shit I'm talking get a tail light and a headlight, bungee a battery to the seat, run the lights off of it with a switch, install the brake switch. Squeaky horn and a 12 dolla mirra' and you can get that shit hooked up in NH.

Wire it up sell it to me on paper, I send it in for the title, wait 3 weeks for it to come back, I sell it to you, you have title, you register it in RI.

KB

Quote:

---

Originally posted by rmbbikes
Wire it up sell it to me on paper, I send it in for the title, wait 3 weeks for it to come back, I sell it to you, you have title, you register it in RI.

KB

---

This may be something I have to think about after the Gap:hellyeah:

Quote:

---

Originally posted by KevinB
I'm sure Japan will be following the trend, Australia(sp?) already has CRF250X's ready for the street.

KevinB

---

And I found the link, also 450X with full lighting.

250x/450x Austraila

Quote:

---

Originally posted by KevinB
And I found the link, also 450X with full lighting.

250x/450x Austraila

---

You know it's just a matter of time:drool:

The CRFX's are already ready for the road in NH minus the brake light, horn, and mirror.

KB

Thats great if you live in NH, but I don't

Quote:

---

Originally posted by R7
well the bolt holding the kickstarter on was backed half way out:dunno:

---

Yup... same thing on my 520... the only thing less fun than push-starting a 520 is push starting a 520 and then back-tracking for 45 minutes at 5 mph looking for your kickstarter. I now bathe the whole thing in blue loc-tite... bolt threads, kickstarter splines, everything.

I'm going to the dealer this week to see if I can get me a new Yamaha plated:chair:

Like what? a yz or a wr?

Quote:

---

Originally posted by theothersean
Like what? a yz or a wr?

---

The smart choice would be a 06 WR450 but I never said I was smart and I'll prolly end up with a yeller YZ450:drool:

Quote:

---

Originally posted by R7
The smart choice would be a 06 WR450 but I never said I was smart and I'll prolly end up with a yeller YZ450:drool:

---

yeah yeah... that thing's sexy.

Or maybe another KTM:)

You're a SICK MAAAN, Mark..... SICK

Quote:

---

Originally posted by R7
Or maybe another KTM:)

---

Should probably do both...
Think of the poor lonely two-wheeled dirty toy in the garage at night, getting picked on by all the shiny bullies. It's gonna need a buddy.


:D

To much money and hassles to get another Yamaha street plated.

This bike does get me a little giggity though:drool:

http://img.photobucket.com/albums/v4...7/untitled.jpg

Cool. You need a bigger bike. :D
http://lilpb.thedebaser.org/525exc.jpg

Odd, you posted that picture at 5:25:D
I don't think I'll need a bigger picture in a day or 2:drool:

After getting a killer deal, I even got them to add a electric fan kit and a skid plate:rockon:

whoa.. congrats! (again!)

I don't change my underwear as often as you change bikes.


Note to self, change underwear more often.:D :D


so when are you picking it up?

I'm picking it up Saturday:D

I'm tempted to do a break-in ride at the Pach on Sunday:)

My dr is still a bit less than full out dirt worthy, I definately don't want to bash it around on the rocks till I get a skid plate, rad guards, bar guards ,and some knobbier tires. and besides I have family coming on sunday for an afternoon dinner.

Mark...you need help... ...

congrats on the new bike..again!

Quote:

---

Originally posted by R7
I'm picking it up Saturday:D

---

Correction, I picked the bike up about an hour ago:drool: