0
I broke the front brake lever on my motard, the MC is off of a KTM 450/525/560 SMR 05~06
It's a rather unique lever, with a fork on the back side of it (see picture). OEM levers are going for about $75-100, and I can't find anything aftermarket to fit it.
On top of the cost, the bike's previous owner told me that he shortened the lever with a Bridgeport and some TIG welding. I don't have that kind of firepower in my garage or the skillset, so I figure at least another $20-50 on top of that for some welding work if I want the same look and feel as I had previously (or, last resort, just hack off the end, grind it smooth, and forget about the ball)
That leaves me with a $95-150 lever, and hoping I never break one again....oh, and let me add that anybody that stocks that lever is telling me 5-7 days PLUS transit time to receive the lever.
I figure for that kind of money I might just want to think about putting a more common MC on the bike so I can get replacement levers more easily...
So, long story short, if anybody has any spare levers they'd unload cheaply, I'll buy those, if not, if anybody has a MC that would work well on a motard, I could go that route instead.