WTB: GSXR Parts

[Trickniner]

I'm looking for a few parts off of a GSXR.

1. K4/K5 GSXR 600/750 top yoke
2. Front Brakes (calipers and master cyl)

If anyone has anything available let me know. Pm or email kirk.charles@gmail.com

[Dip Dungles]

I have 06-07 calipers but not sure if they fit. If they do they are all you.

[Jim]

I have 06-07 calipers but not sure if they fit..

they dont.

i have 04/05 GSX-R calipers with Verah RJL pads. pretty sure i have a spare master cylinder kicking around (they're all the same from 05+)

[Trickniner]

I have 06-07 calipers but not sure if they fit. If they do they are all you.

Actually those will fit. I should have mentioned the calipers will be bolted up to 06 750 forks. So those would be great. Do you happen to have the MC too? Send me a PM or email and let me know what you might want for them.

Also I know that the top yoke I am looking for will not fit the due to the stem bore size being too small. This is all for a front end swap on an SV1000. The 04/05 top yoke works best in maintaining the steering lock and does not require modification of the ignition mounts. The stem bore just needs to be opened up to 28mm.

[SVenpointsixtwo]

Actually those will fit. I should have mentioned the calipers will be bolted up to 06 750 forks. So those would be great. Do you happen to have the MC too? Send me a PM or email and let me know what you might want for them.

Also I know that the top yoke I am looking for will not fit the due to the stem bore size being too small. This is all for a front end swap on an SV1000. The 04/05 top yoke works best in maintaining the steering lock and does not require modification of the ignition mounts. The stem bore just needs to be opened up to 28mm.

Just as a point of information: the '04-'05 600/750 top triple will work on the SV1000S, unmodified. However, it will NOT fit '06-'07 fork legs. '04-'05 used 43 mm USD forks, while the '06-'07 used 41 mm USD forks. I guess you could shim it. '06-'07 also used 310 mm discs versus the '04-'05 300 mm, so you may need different rotors.

I used a complete '04-'05 front end; it's the easiest bolt-on swap, as the SV wheel fits, unmodified. I needed 5 mm spacers on the calipers to make the SV rotors work with the GSXR calipers though. '06-'07 forks will work with an SV wheel, but you'll need custom axle spacers.

Hope that helps!

[Pigman]

Hey FYI................


http://boston.craigslist.org/nwb/mcy/3787598811.html

[THE STUFF 187]

I have everything you need for that bike give me a call 508-379-0100 Justin

[Awesome]

I have everything you need for that bike give me a call 508-379-0100 Justin

You have a full front end to swap onto an SV?

[THE STUFF 187]

I do have forks & just about every part for that bike & many other models as well. We have thousands of used parts for most newer bikes

[theducman]

they dont.

i have 04/05 GSX-R calipers with Verah RJL pads. pretty sure i have a spare master cylinder kicking around (they're all the same from 05+)

Are the 04/05 pads the same as 06/07? if so yould you sell the pads?

[Jim]

Wirelessly posted (Doc sucks)

they dont.

i have 04/05 GSX-R calipers with Verah RJL pads. pretty sure i have a spare master cylinder kicking around (they're all the same from 05+)

Are the 04/05 pads the same as 06/07? if so yould you sell the pads?

If they were, I would've used them.