2004 GSXR (Race Ready)

[senecak19]

2004 GSXR 600 (Clean Title)
Asking: $4900. Make me an offer for everything OR just the bike!

Item Description
Windscreen: Zero Gravity (New)
Front Fairing Stay: GP-Tech
Rearsets: OSF Fully Adjustable
Exhaust: ART Slip-on
Brake Lines: Galfer SS Rear / Goodrich SS Front
Brake Pads: Galfer HH Race Pads
Clip-ons: Woodcraft w/ replaceable bar.
Shock: Penske Double Clicker (3 weekends, Have all original packaging)
Forks: GMD Spec / Race Tech Internals (Guaranteed straight from GMD)
Bodywork: Cheetah
Mapping: PowerCommander (mapped by fuelmoto usa)
Tuning: FuelMoto Timing Retard Eliminator
Oil: AMS Oil / Genuine Suzuki Filters
Air Filter: BMC
Chain: EK520
Sprockets: Renthal Ultralight, Front & Back (15 / 46)
Plugs: New NGK's
Case Cover: Woodcraft w/ replaceable plate (Left side)
Master Cylinder: Factory 2006 R1 Brembo
Frame Sliders: Woodcraft w/ replaceable pucks
Tires: Michelin Pilot Power Race (Used one race)

Comes with the following:
(1) Complete spare set of wheels with rotors
(1) Spare front hugger
(1) Spare rear swing arm
(1) Spare wiring harness



I have a few streetable items left too
Original Headlight
Turn Signals
Turn Signal Switch
Kickstand
Factory can


Original gauge cluster had approximately 1600 miles on it as stated on the Title. Its never seen the street as long as I've owned it, so mileage wise, I'd say its under 2000. Don't know what the current gauge cluster states, but I have the title.


Bodywork is going out for paint, probably coming back in a standard solid color (red, blue or black). Then again, all is you need is a set of factory bodywork and its pretty much street legal.



VIDEO ADDED:
~~~~~ YouTube - 2006-LRRS ~~~~~






*** Rain tire not included. Braking Wave Rotor Not Included ***

[imkindafkedup]

Did you already send the body work out for paint?

[senecak19]

Yes and no. Pieces are being prepped but no paints been sprayed, that much I know.

[imkindafkedup]

how much are they quoting you for that? In other words how much would you take off the price if they don't paint it at all?

[senecak19]

I bring the my bodywork to a shop and do the work myself. My only real cost is material.

[senecak19]

I'd be willing to take a little money off if someone were to accept the bike in primer form. Again my savings would only come in the form of material costs.

[imkindafkedup]

I would have done the same, this probably won't be the bike for me. Best of luck with the sale.

[senecak19]

If I could figure out how to load a video on you tube, I'd post a small video clip of the bike in the bowl at Loudon from early last season. Then you could see for yourself what the bike sounds like and see for yourself it's got some giddy'up. I'm winning the race so you can hear it well :-)

[imkindafkedup]

haha I don't doubt that the bike is worth it, unfortunately its just out of my funds. All of the unbelievable deals have been out of state. I'm taking a vacation next week to hopefully pick up on one of them.

[senecak19]

Just for reference, I'd be willing to adjust the price to sell "just" the bike".

[senecak19]

Not that this is needed here, but... I'm willing to crate it.

[senecak19]

Bump. Photos added!

[senecak19]

The 520 chain was purchased the same week as the shock and has three weekends on it as well.

[kermita]

A race-ready I4? Do I see a swap with Bergs in the near future?

[Jim]

have someone looking for their 1st street bike. do you have street plastics for this, or just race?

[senecak19]

1) Bergs is one of the parties interested.

2) Sorry no street plastics left. Sold them within days of receiving the bike back when I bought it. :-)

[Jim]

ok thanks. would be a great bike for the price, but i figured this was a track only bike

[senecak19]

I'm assuming your insinuating it'd be a good street bike, because it is a track only bike :-)

[Jim]

yea, that would be a great bike for the street (minus the shock), since it has recently serviced forks, brakes, etc

[senecak19]

Since I have the factory headlight and turn signals... I'm inclined to say... yeah all you need is a set of factory bodywork (easily obtained on eBay) and your off and running.

[imkindafkedup]

did u decide on a color yet or make progress on the paint?
how much do u expect materials to cost for that?

[senecak19]

Paint materials... couple hundred bucks will buy everything.

[imkindafkedup]

Paint materials... couple hundred bucks will buy everything.

Pm me a price, with as is no additional materials or time for just the bike. I may need the bike assembled a bit more like forks and what not as I have no experience with that.

[senecak19]

Below are some current pictures. Let me know if any of you have any questions.

[senecak19]

Thought I'd post this...

Gsx-r 600 04' Race Bike & Parts - 13x Forums

Mine seems to be going out at a bargain in comparison. Maybe I should be asking for more.