95 CBR 600F3 (parts bike) - $500/bo

[sdog30]

I have a 95 F3 with no title for sale. Strictly a parts bike. Here's my CL ad:
http://westernmass.craigslist.org/mcy/1756319052.html

I also have almost two full sets of fairings (mostly damaged, but might be good for the track), seat, Vance+Hines full exhaust (slight damage to the badging) other various parts. Willing to part out the bike if you need something in specific.

[Kurlon]

In the ad you say the wheels are toast? Cosmetics or really busted? (They look round in the pics. : ) )

[jcbell1007]

I really need an F3 front rim, with or without rotors. How bad are the wheels?

[sdog30]

In the ad you say the wheels are toast? Cosmetics or really busted? (They look round in the pics. : ) )

I really need an F3 front rim, with or without rotors. How bad are the wheels?

They came off a bike that was hit, so when I say "toast" these aren't just a little bent, we're talking about half the lip torn off and twisted up, there is no repairing these unless you know how to weld really well.

Sorry guys. Rotors are good, though.

[Kurlon]

Well bugger... It's the wheels/forks/triples/swingarm/shock, and maybe the exhaust that I'd have a use for. D-oh!

[Crash]

Not to hijack, just trying to help somneone out.... I have a front F3 wheel without rotors but with good bearings. It would need to be staightened since the lips are bent. $65. PM me if interested.

[sdog30]

Well bugger... It's the wheels/forks/triples/swingarm/shock, and maybe the exhaust that I'd have a use for. D-oh!

Well...I have everything that you requested but the wheels.

[sdog30]

Not to hijack, just trying to help somneone out.... I have a front F3 wheel without rotors but with good bearings. It would need to be staightened since the lips are bent. $65. PM me if interested.

I've used MC Wheel in Swanzy, NH (near Keane) to straighten wheels. They do a good job and will give you a discount if you pay cash. I think they charge around $100 a wheel.

[Kurlon]

Well...I have everything that you requested but the wheels.

It's the wheels that seem to drive the cost when I'm looking. If I have to source them separate, up goes the project cost. :/ In a dream world I'd find an F2 rear setup, F4i front, exhaust and a set of 85 to 92 Ninja 600 carbs all for $500, and a hidden sack of cash to go with it.

If you end up parting it, or find someone who wants the motor/elec/carbs but not the rest ping me.

[SVRACER01]

Wirelessly posted (Instinct: Mozilla/4.1 (U; BREW 3.1.5; en-US; Teleca/Q05A/INT))

if mc wheel can piece together ginos exploded rear magnesium wheel then he can fix that f3 wheel

[sdog30]

Wirelessly posted (Instinct: Mozilla/4.1 (U; BREW 3.1.5; en-US; Teleca/Q05A/INT))

if mc wheel can piece together ginos exploded rear magnesium wheel then he can fix that f3 wheel

They are good. Those are guys are real cool. I'll try and snap off a couple pics of the wheels tomorrow and post them up.

[sdog30]

Okay, I've sweetened the deal for all my NESRians:

I'll throw in almost two full sets of OEM plastics, Vance and Hines full exhaust, front and rear fairing stays (slightly bent), OEM seat and a box of parts (mostly light related like a slightly damaged integrated tail light and stock tail light, blinkers and plate light)

All this can be yours for $800 (including the bike).

[sdog30]

Here's some shitty photos, sorry.

One set of plastics are spray bombed red, this includes two front fairings and two rear, one of the side fairings is missing the vent piece.

Next pic is hard to see, but these are a black set that the paint is good, but there is some rash on the fairings but includes: two front fairing, one rear, one head light bezzle, front fender.

Third pic is of front fairing with rash and damage to mirror mount area, it's aftermarket, one piece.

Forth pic shows the full exhaust, rear hugger, seat, front and rear fairing stays and box o'parts.

Last pic is of the major damage to the can (the badging is bent) and there's a little bit of denting.

[sdog30]

The best use for this bike (besides using the parts to repair an F3 you already own) would be to track it.

You would need to buy clip-ons and rear-sets (which you might do to switch any bike to a track bike), clutch and brake levers (which you might have upgraded to break-away levers anyways, I do have front master cylinder, but you should probably rebuild it), wheels and tires (unless the wheels are repairable, you could probably get one-off tires pretty cheap), stator cover and voltage regulator with wire harness plug, fuel line, gas cap and petcock valve.

You might also want to change the chain and sprockets (there a little rusty) and pic up race plastics (but you should be able to use the plastics I give you if you don't want to do that)

Anyways, enough info, I'll post pics of the wheels tomorrow night. PM me with any questions.

[6 Fingered Man]

If you part it i might be interested in the tank if it is cheap enough.

[sdog30]

Okay, here's pics of the wheels. I guess the rear isn't as bad as I thought (first pic), it's just has a huge dent, but should be able to straighten ($100ish).

The front is bad. The lip is torn and bent up, but it's missing a good section of the lip, so unless they can weld new metal to form the rest of the wheel, I think the front is definitely toast.

$700/bo for everything.

[sdog30]

$600 for everything. Again, NESR only deal.

[SVRACER01]

i might actually have a stator cover for it...i think its got some asphalt embedded in it but it should work.
prime trackbike...cheap too. someone should grab it and try trackdays with it. for that pice you could easily sell it for what you gt into it

[sdog30]

i might actually have a stator cover for it...i think its got some asphalt embedded in it but it should work.
prime trackbike...cheap too. someone should grab it and try trackdays with it. for that pice you could easily sell it for what you gt into it

If someone comes to get it this weekend, preferably early Saturday, it's all yours for $500. Oh, and since I've never run the engine, if it doesn't start after you put the stator cover on, I'll refund half the purchase price (as long as it's something major).

[sdog30]

Okay, last bump before it gets traded next weekend.

[sdog30]

Trade fell through...somebody make me an offer I can't refuse.

[sdog30]

$300 for the bike. (just don't feel like going through the hassle of parting it out, but at this stage PM me your part request and I'll let you know)

[sdog30]

Forgot to mention that I would also take a trade.

[darkduc7]

oh, ok, i'll bite. check your pms.

[sdog30]

Here's some better pics of the plastics and the exhaust (per request )

The major damage to the exhaust is some scrapes on the can and the badging is a little bent on the corner. The seat is in good shape, the seat and the exhaust are off the 95 part bike, the plastics are from a 98 F3, but should fit okay. One tail light is from the 95 and the Clear Altenatives is from the 98.