I have 2 $40 Dunlop certificates
$50 for both
CCS #31
$20 and a used grom reflector... ok 2 but thats it
LRRS EX 66
BostonMoto | Yoshimura | GoPro | K/N | Amsoil | Computrack | Vortex Sprockets |
EBC | Dunlop | Woodcraft | ArmourBodies | Fuel Clothing | Progrip | FmF Racing|
factoryeffex
Lol I'll take a fender eliminator if u have it
CCS #31
This.................. is what I have and used a part off the OEM HUGE rear fender and attached the directionals to it.... Very clean
Basic Plate Mount
$32
The perfect addition to any integrated taillight. Powder coated stainless.
Grom Hard Parts - MNNTHBX
Mine.....with cheap LED directionals from Freedom Cycles
NOW GIMME MY CERTS FUCKER!!!!!!!!!!!!!!!!!!!!
Last edited by Pigman; 12-09-14 at 10:22 AM.
LRRS EX 66
BostonMoto | Yoshimura | GoPro | K/N | Amsoil | Computrack | Vortex Sprockets |
EBC | Dunlop | Woodcraft | ArmourBodies | Fuel Clothing | Progrip | FmF Racing|
factoryeffex
Lol I've ordered the integrated tail light already...from mnnthbx I want the exhaust
CCS #31
Ordered front blinkers too...need a handle bar and exhaust now...got eBay special mirrors too
CCS #31
Pro Taper 7/8 SE Bend off Ebay and RidersDiscount for the Yosh Full system at 309 shipped best deal on a full system.....
LRRS EX 66
BostonMoto | Yoshimura | GoPro | K/N | Amsoil | Computrack | Vortex Sprockets |
EBC | Dunlop | Woodcraft | ArmourBodies | Fuel Clothing | Progrip | FmF Racing|
factoryeffex
CBR or Hotbdies off Ebay for cheap......and get a set of front pegs off a CBR600 get rid of the bigFattysOriginally Posted by MaRce1o
LRRS EX 66
BostonMoto | Yoshimura | GoPro | K/N | Amsoil | Computrack | Vortex Sprockets |
EBC | Dunlop | Woodcraft | ArmourBodies | Fuel Clothing | Progrip | FmF Racing|
factoryeffex
Saw the pro taper of eBay...exhaust I want an underbody exhaust...MAD has a nice one for cheap but can't find it anywhere
CCS #31
LRRS EX 66
BostonMoto | Yoshimura | GoPro | K/N | Amsoil | Computrack | Vortex Sprockets |
EBC | Dunlop | Woodcraft | ArmourBodies | Fuel Clothing | Progrip | FmF Racing|
factoryeffex
Close but no, that's like the M4
I want like the Mnnthbx of the MAD...completely under
CCS #31
Might try and make my own
CCS #31
Thats what Justin Did.....certs for the OEM stocker off mine???
and you can cut the can down too sounds better...than stock
Last edited by Pigman; 12-09-14 at 12:03 PM.
LRRS EX 66
BostonMoto | Yoshimura | GoPro | K/N | Amsoil | Computrack | Vortex Sprockets |
EBC | Dunlop | Woodcraft | ArmourBodies | Fuel Clothing | Progrip | FmF Racing|
factoryeffex
Just got a full Yosh for 250......score
LRRS EX 66
BostonMoto | Yoshimura | GoPro | K/N | Amsoil | Computrack | Vortex Sprockets |
EBC | Dunlop | Woodcraft | ArmourBodies | Fuel Clothing | Progrip | FmF Racing|
factoryeffex
Found a glass pack alike exhaust I should be able to make it work $49 lol
CCS #31
Get on hondagrom.net and there is a DIY on how to make the OEM flow and be loud for free......plus a ton of good grom info
LRRS EX 66
BostonMoto | Yoshimura | GoPro | K/N | Amsoil | Computrack | Vortex Sprockets |
EBC | Dunlop | Woodcraft | ArmourBodies | Fuel Clothing | Progrip | FmF Racing|
factoryeffex
Saw that...not a bad idea and it actually doest look ugly after all. Going to try and keep it underbody still
Tons of shit for grom though on that website
CCS #31
My OEM full system is free for anybody who wants to experiment. I went with the IXIL and like it. 170 BBkit going in next week.
Thread derailed! Although the OP derailed it so I guess it's his call...
Anyways, if you want to sell dunlop certs, you should post the expiration date.
Zip-Tie Alley Racing
LRRS/CCS #103
PPS | Dunlop | Boston Moto | Woodcraft & Armour Bodies | 35 Motorsports | Pit Bull | K&N
Posting Permissions
Reply With Quote