Misc. First Gen SV Parts (revisited)

[BMFR6]

I know there was a small amount of interest in what I have left from my SV. Everything is best offer, and most of the stuff is small so buyer pays shipping or picks up (or waits until the season starts and I'll bring it up to the track). Unless I specify otherwise, the parts are new and for a first gen SV) So here goes.

Forks, GMD set up. http://www.nestreetriders.com/forum/...rks-built.html

GSXR Bodywork http://www.nestreetriders.com/forum/...-bodywork.html

Brand new Puig Double Bubble windscreen. Clear, never even installed. $50

1st gen stock front rotors, no bolts $70 (come on, they go for $150 on ebay)

Galfer front braided superbike lines. replaced these on my SV thinking they had a leak, turned out to be the calipers so the lines were still good. $50 (used)

Daytona Analog Tach (no wiring instructions, used)

Front and Rear Brembo Brake Fluid reservoirs (not sure what they fit, but can take pics if needed, used only to fill brake line. long story)

Front Brake SV Fluid Reservoir (used to fill brake line)

(5) Front Rotor Bolts

(2) New Clutch Levers

12 Generic style Dzus Rivet type fasteners (not sure what make they are, never used them)

Caliper Piston Seals (full set, 4 on the left, 4 on the right)

Clutch cable

Front Sprocket Washer

(2) Phillips Screws (I think these are for mounting the float bowl to the carb)

(3) Front Brake Levers w/pivot pin and nut

(1) Motor Mount Bolt (part # 09103-?????)

Outer Clutch Cover O-Ring (Seals plastic cover to case)

Clutch Lever Adjuster

DID 520 ERV3 520 Chain w/2 rivet style master links (used but not beaten)

Front Axel (Used but straight) I replaced this because I wasn't happy with the drilling for the safety wire, yes I can be OCD sometimes

Woodcraft Rearset Mounting Bracket (Used but straight)

Woodcraft Rearset Mounting Bracket (New)

Woodcraft Highmount kit for Rearsets (attaches to standard woodcraft rearsets to raise the peg and move it further back. used but not by me)

(1) Woodcraft Peg

Anyone need any transponder mounts, I have (1) new style and (1) old style

Cargo net thing (just throwing this is. one of those stupid bungee cargo net things. has collected a lot of dust)


Any interest in any of this, send me a PM or post up. If nothing goes to you guys it will be going in the recycling bin so speak now.

[GixerJockey]

It is entirely possible that you have a new PM.

[Hardcore]

pm'd

[GixerJockey]

pm'd

You better not have PM'd about the same stuff I PM'd about...

Just sayin...

[Hardcore]

You better not have PM'd about the same stuff I PM'd about...

Just sayin...

well, just sayin, I did, my pm takes priority because I'm more important than you----------------------------------BEEEATCH !!!!!

[Daytona440]

Oh how I love these threads...

[GixerJockey]

Oh how I love these threads...

What's your favorite part?

[Daytona440]

What's your favorite part?

I'm sure some of that stuff is probably mine. LOL

[BMFR6]

I'm sure some of that stuff is probably mine. LOL

ha. I don't think much in that list. the bodywork and I think the faux Dzus fastners because I don't ever remember buying them.

[Fitz]

So what's left for parts?

Thanks,
Fitz

[BMFR6]

waiting for noel to confirm his list then I'll update