Wiseco 8.9MM (KTM) valve shim kit

[Tricky Mike]

So, I ordered a 7.48MM kit for the CBR and the jamokes I bought the kit from sent me an 8.9MM kit. Fantastic. It's brand new, unused... Nothing swapped, etc... Just doesn't fit any of my other bikes.

For reference:
http://www.motosport.com/dirtbike/WI...-SHIM-KIT-89mm

I paid $60. It's yours for $35.
Should fit the following (but it's YOUR responsibility to confirm it works with your bike):

2011 KTM 250 SX-F
2010 KTM 250 SX-F
2009 KTM 250 SX-F
2008 KTM 250 SX-F
2007 KTM 250 SX-F
2006 KTM 250 SX-F
2005 KTM 250 SX-F
2012 KTM 250 XC-F
2009 KTM 250 XC-F
2008 KTM 250 XC-F
2007 KTM 250 XC-F
2012 KTM 450 SX-F
2011 KTM 450 SX-F
2010 KTM 450 SX-F
2009 KTM 450 SX-F
2008 KTM 450 SX-F
2007 KTM 450 SX-F
2006 KTM 450 SX-F
2005 KTM 450 SX-F
2004 KTM 450 SX-F
2003 KTM 450 SX-F
2010 KTM 450 XC
2009 KTM 450 XC
2008 KTM 450 XC
2009 KTM 450 XC-F
2008 KTM 450 XC-F
2007 KTM 450 XC-F
2006 KTM 450 XC-F
2010 KTM 450SX
2009 KTM 450SX
2008 KTM 505 SX-F
2009 KTM 505 XC-F
2008 KTM 505 XC-F
2010 KTM 505SX
2009 KTM 505SX
2010 KTM 525 XC
2009 KTM 525 XC
2008 KTM 525 XC

[gregp]

Odd, but that website says that they will not fit my '12 350 EXC-F, but the diameter is correct. Maybe a different thickness range?
I am looking for a kit - 8.9mm OD, with a range of 1.72mm to 2.6mm.
If that kit covers this range, I will take them.

[Tricky Mike]

Strange. Seems like it'll fit. Just checked the kit itself. It's 8.9MM diameter with 3 shims each from 1.72 to 2.60 in .04mm increments.

[gregp]

OK, Mike. It sounds like it is just what I need. I will PM you for the sale.

[Tricky Mike]

SOLD!