cost powdercoat a dirtbiek frame

[black]

Well my kdx frame is pretty beat saw in another thread in Maine it was 200$ to powdercoat

I'm not in maine and a quick search found a shop in boston charging 400$ plus paint for powdercoating a moped frame.

Anyone have a reasonable person within 60-90 minutes from wilmington who could do this?

[Kurlon]

Bear in mind, my frame was a three coat job, for a single color it'd be less.

[black]

where was that shop in Maine exactly.. I wouldnt mind making a trip i think?

[Pigman]

Do it your self...... POR15 is the shit

Stop Rust with POR-15 - We Know What Permanent Means!

[Kurlon]

where was that shop in Maine exactly.. I wouldnt mind making a trip i think?

Cobra Powder Coating | Facebook

Alfred Maine.

[boosten lebaron]

I used Barnstorm cycles in spencer for my yamaha frame. They did it for under 300 including some light welding. Quality was top notch. Its been at least 3 years and it still looks perfect.

[TheIglu]

I used Barnstorm cycles in spencer for my yamaha frame. They did it for under 300 including some light welding. Quality was top notch. Its been at least 3 years and it still looks perfect.

ORLY


That's not too bad a drive from me.....

Perhaps I'll get started on my CB750F SS rebuild sooner than later. It's only been a bare frame in my basement for 9.5 years.

[Larry]

GDL paint in Windham. All my industrial powder coating and painting is done by them and they did a frame for me a while back. At the time it was 150 for a full rack of parts. Frame takes up most of the rack but a few small parts will fit with it.

[tomk1960]

A well-done job will be at least $200. That will include media blasting, cleaning, outgassing, a zinc primer basecoat and the final finish coat. I might be able to help and am roughly an hour away.

[mjm198]

has anyone ever painted the chrome rims black on a dirtbike? i like the way it looks

[03Worc9R]

Toms Cycle Recycling - For all your restoration needs!

[TheIglu]

Toms Cycle Recycling - For all your restoration needs!

Clicked link, see red 1100F version of my black 750F on the front page. Nice.