Good Dyno Guys

[roadracer685]

anyone in the greater worcester area??? Great service from a knowledgable guy @ Out of Control Racing. He has fixed too many unhappy Robs traveling dyno customers bikes over the last year he has had his own dyno at his shop @ the summit in worcester. no he can't travel but he's worth the money and btw... the guy at OCR learned from Harry's and Harry's is also very respected for MC / PCIII tuning

A truely custom map takes 4-5 hours with set up and breakdown. check the price sheet from these other places as they may have additional fees for set up and breakdown. My CBR was pulled 27 times on my custom map and yes he uses anal probe for ega from dynojet. he explained that the dynojet O2 sensor needs to be right up near the header collector to get the best results, and that it does an o.k. job by anal probing. best case drill some ports in the exhaust near the collector and plug them after the tuning session

besides Dynojet has been doing engine tuning for _**_years, how could they stay in business if the anal O2 probe wasn't that effective of an EGA it's all about the placement not the penetration

I said harrys machine in Northboro he takes his time and knows his shit, he spent half a day on a few of my bikes because hes a perfectionist and isnt happy until its right. 508-366-1455 btw i havent heard much good about out of control but i guess you cant make everyone happy

[jwm2k3]

John, Dyno Solutions in Danbury CT is a straight shooter, I know it is far and it does take him several hours.

His shop is right next to a nice dealer with BMW, Ducati's, MV's, Bi Moto lots of exotics.

I think John just moved his shop to another location. I have an MV F4 and he is quite familiar with MV's so I will truck it down to him to custom map it since I just bought a completely new exhaust and mid pipe...

[jwm2k3]

I had my bike done from Robs Dyno Service at the reacetrack last year and he did an awsome job. I was having a problem with the idle and he remapped 1rst hrough 3rd and tweaked the other three gears and it was like a different bike altogther once I got n it and rode it.

I had my RC51 dynoed and custom mapped by Rob. I bought mufflers and mid pipes from different companys and there was no 'downloadable' map on the internet for it. The bike was terrible, totally herkey/jerkey, chug chug at low speeds. Rob transformed the bike to be much smoother. Im sure it could be better, but its WAY better than it was and Im happy. It took a few hours and a bunch of runs to get it right. Cost was $200 total

[loridin64]

Hey John, do you remember Alex? He has a shop somehwere around here. He was/is on Speedzilla and had a whole thread on his Dyno runs. He'd do a run after every mod...
i could always go back there and see if i can find it.

[jwm2k3]

Yeah I will PM you his phone number...

[The Crashing Tomato]

Out of Control Racing has fixed (remapped) many unhappy Robs traveling dyno customers bikes

the guy Adam at Out of Control Racing learned from Harry's and Harry's is very respected for MC / PCIII tuning.

RR685 have you had any first hand expert experience with either rob or adam? I guess they have both had good days and bad