best place to get a dyno tune?

[Mondo]

Hey guys...

I need to get my CBR tuned...badly..

I have a full akropovic titanium race exhaust, BMC race filters, and a PC-III.

I've heard good things about Seacoast cycles in NH...

Can you guys list some other places for me? Thanks!

[Jim]

RJ's in NH (nashua i think). they were running specials for $100. gave out coupons at lowell bike night, and someone on NESR put up a thread saying they were offering that price for a special if you mentioned their name.

http://www.rjsmotorsport.com/

[Mondo]

hmmm
i vaguely remember the coupons.

Anyone else heard of these guys?

[crowspeed07]

dent sport garage in norwood

[Jim]

try M125-003 as a base to map your CBR, in case you cant get it to a shop for a while

[Pigman]

Mondo I heard these guys are Great>>>>>

http://www.xtrememotodesign.net





























LOLOLL just bustin balls...............use Rj's they know there shit...

[GixerJockey]

I suppose central Ct. is a little too far?

[boloson]

theres a guy in gardner that travels to do the dynos. rob's dyno i believe? cant recall the name

[Sheppo]

RJ's is the Best around. Call Roger tell him Doug from BMS sent you and that you also saw him at Motorcycle night. He'll work with you to get you a GREAT tune !!

[The Crashing Tomato]

OCRacing in Worcester

the guy Adam has put his time in on that Dyno Jet machine which will result in you getting a custom map right for your application. Not sure of '09 pricing though

[scottieducati]

Disclaimer: I don't have PERSONAL experience with Rob's dyno. But I do have a friend who had a nightmare experience. I'd go to someplace with a solid rep for sure. +1 for Seacoast.

[boloson]

Disclaimer: I don't have PERSONAL experience with Rob's dyno. But I do have a friend who had a nightmare experience. I'd go to someplace with a solid rep for sure. +1 for Seacoast.

same here. no personal experiences with him just heard about him & probably 1 of the few that does it in MA

[Jayspeed]

I had RJ's do mine at a trackday. He took his time to get it right it seemed. Made great numbers and smooth power arc. My bike is so stinking fast, I have a hard time telling the difference in power. He did clean up some slop in the low end that my exhaust set up and pcIII tune was doing which is what I wanted, an engine running at proper air fuel ratio.

[ahtune69]

I had RJ's do mine at a trackday. He took his time to get it right it seemed. Made great numbers and smooth power arc. My bike is so stinking fast, I have a hard time telling the difference in power. He did clean up some slop in the low end that my exhaust set up and pcIII tune was doing which is what I wanted, an engine running at proper air fuel ratio.

Yep I was there and he spent at least an hour on your bike, well worth the $100 imo.

[puckoach]

long ago I use to use this place for my tune ups, not sure if they have a dyno though, doesn't hurt to ask, they probably know who does if they don't

located in Kingston NH

http://www.newenglandperformance.com/

[AimlessMoto]

Orange, MA.... talk to Jeff Castine...

All Sport Cycle Service
Orange MA 01364
(978) 544-6535

[KillBill]

Wirelessly posted (** BB 8830**: BlackBerry8830/4.5.0.135 Profile/MIDP-2.0 Configuration/CLDC-1.1 VendorID/105)

I have also heard great things about RJs

[yellosuzku]

Orange, MA.... talk to Jeff Castine...

All Sport Cycle Service
Orange MA 01364
(978) 544-6535

Jeff did a great job on my bike but if RJ's does it for $100 and does it well, it's worth saving $100 off Jeff's price.

[akira700]

Disclaimer: I don't have PERSONAL experience with Rob's dyno. But I do have a friend who had a nightmare experience. I'd go to someplace with a solid rep for sure. +1 for Seacoast.

Just to give an alternative view. I took my 05 600RR to Seacoast and found it a waste of time and money. I tweaked my own map better. And I'm no expert.
Dude, I can email you a map that I have refined that you can try if you want. I have an Akra slip on though. But the 05 and 06 are indentical otherwise.
PM me if ya wanna try it.

[OreoGaborio]

Wirelessly posted (Samsung Lube.... Er, Glyde: Mozilla/5.0 440x240 Samsung SCH-U940 NetFront/3.4)

RJ's in NH (nashua i think). they were running specials for $100. gave out coupons at lowell bike night, and someone on NESR put up a thread saying they were offering that price for a special if you mentioned their name.

http://www.rjsmotorsport.com/

[DucDave]

Jesse at Seacoast knows his way around mapping and dyno tuning....

[roadracer685]

Harrys Machine in Northboro the best around IMO 508-366-1455

[seth399]

no personal experience but I have a buddy sponsored by Robs Dyno and he likes em...they tune his dirtcycles

[kawazzr]

Although I've not had my bike Dyno'd at RJ's (not sure I can with a carb bike), they are great at RJ's. Very knowledgable, friendly, and never make you feel rushed...even when waiting for an answer to a stupid question.

[Sheppo]

Although I've not had my bike Dyno'd at RJ's (not sure I can with a carb bike), they are great at RJ's. Very knowledgable, friendly, and never make you feel rushed...even when waiting for an answer to a stupid question.

You CAN Dyno a carbed bike. It's all jets and adjustments not a powercommander. Again it's another great idea. Roger dyno's those as well.