Front Stand Pin

[BostonSVkid]

Hey Guys
So I bought a pitbull front stand from Kitt. The pin will not work with the sv1000 and it looks to be larger so I may be able to machine it down. Anyone with a lathe in the boston area want to help out? I can order the pin if I have to but figured I would ask around.

[Uncle Snake]

You can send it to me if no one closer can help.

[BostonSVkid]

You can send it to me if no one closer can help.

Thanks it would cost more to ship this one than to just buy a new one but I def appreciate the offer.

[scottfromboston]

Aren't those case-hardened? How much do you have to machine it down?

[Uncle Snake]

Aren't those case-hardened? How much do you have to machine it down?

I turned one a coupla years ago for my TL and it was not case hardened. It was soft steel and plated.

[BostonSVkid]

Waiting on that info as we speak.

[Tricky Mike]

13MM by the looks of it:
http://www.woodcraft-cfm.com/Woodcraft-pin-chart.htm

I'm about 35 minutes away from you if that's close enough...

[BostonSVkid]

13MM by the looks of it:
http://www.woodcraft-cfm.com/Woodcraft-pin-chart.htm

I'm about 35 minutes away from you if that's close enough...

Damn looks like the pin has an angle to it per Pitbull oh well guess I will have to order it from them thanks everyone.

[BostonSVkid]

Think you could mill the pin I have down this week mike?

[scottieducati]

Tim, stop by my place when you have a chance, I have an assortment of PB front pins, although I've never owned a Suzuki so I'm not sure I'll have one if it's different from Duc / Triumph / Honda / etc.

[BostonSVkid]

Tim, stop by my place when you have a chance, I have an assortment of PB front pins, although I've never owned a Suzuki so I'm not sure I'll have one if it's different from Duc / Triumph / Honda / etc.

Hey Scott
DO you know what number pins you have? If not long as you have a 13mm one I will give it a try since that is the diameter of the 1000.

[scottieducati]

I'll check / measure what I got tonight and let you know bud.

[klepsta]

If you need a pin made, and can get me the length and diameters of the body sections, I can make one for you outta stainless or something. Let me know.

[BostonSVkid]

I'll check / measure what I got tonight and let you know bud.

Thank you I will wait on getting this one milled or one ordered from pitbull. Out of what bikes I know you have owned I am guessing not but hey I could be wrong!

[SVRACER01]

Wirelessly posted (Instinct: Mozilla/4.1 (U; BREW 3.1.5; en-US; Teleca/Q05A/INT))

Someone (i wont mention any names but her initials are amanda) lost my pin at VIR, its the same one for both the sv1k and my superbike, so now i use a 3/8 drive 3" extension