Welcome to NESR! Most features of this site require registration, including replying to threads, sending private messages, starting new threads, and uploading files. Click here to register.

Page 2 of 2 FirstFirst 12
Results 26 to 31 of 31

Roll or plant after high-siding?

  1. #26
    Member lee955i's Avatar
    Join Date
    Sep 2002
    Location
    Winter Haven, FL.
    Age
    58
    Posts
    178

    Roll or plant after high-siding?

    Originally posted by Paul_E_D


    Besides, in some cases backmarkers are the future of the sport. You can't start out at the front.
    Sure you can, just pre-register .
    Seriously, my 2 crashes this year were two lowsides. One in the bowl where I blew a brake marker and got waaay high, and one in 2 where I ground the exhaust and levered up the front wheel. Both times I was on my ass before I knew what happened. Very rarely, if ever, do you get to "plan" how you're gonna fall. All you can do is try to stay safe while you're sliding and hope you don't hit anything else.
    Highsides are another story. You're on....then, you're up in the air. Depending on how you get launched, you could come down any of a dozen ways, and, they almost all hurt . Thats why I race an EX500. No power means less of a chance of the dreaded airborne recon .
    Cheers, Lee S.

    0 Not allowed! Not allowed!
    I know i'm slow, you don't have to rub it in.
    Why, Yes! I do think you're a Wanker!

  2. #27
    Super Moderator OreoGaborio's Avatar
    Join Date
    May 2004
    Location
    MA
    Age
    45
    Posts
    39,280

    Roll or plant after high-siding?

    HAH! Lee, i didn't know you were on here... We haven't met but i was just browsing the latest results the other day checking out what kinda times people were pulling on EX500's. I was checkin out your numbers & discussing em w/ Daviid, another member cuz we're both planning on racing EX's in the near future along w/ a few others from NESR

    Are you doing any racing on Sunday? I'll keep an eye out for ya.

    0 Not allowed! Not allowed!
    -Pete
    NEMRR #81 - ECK Racing
    Cyclesmith Track Days
    Woodcraft | MTag-Pirelli | OnTrack Media
    '03 Tuono | '06 SV650 | '04 CRF250X | '24 Aprilia Tuareg

  3. #28
    Soul Rider Paul_E_D's Avatar
    Join Date
    Sep 2003
    Location
    western, MA
    Age
    54
    Posts
    15,225

    Roll or plant after high-siding?

    Lee, Have you done the trick where you shorten the crossover pipe on the stock exhaust to pull the closer together? That's an essential mod if you want to go fast on an EX. It buys you some ground clearance. Rearsets are good too.

    0 Not allowed! Not allowed!
    Paul_E_D


  4. #29
    Lifer
    Join Date
    Dec 2003
    Location
    Ma
    Posts
    10,687

    Roll or plant after high-siding?

    I was looking at results yesterday,, and here's a great question. Who is it that permits Wood to run his gixer 1000 in the MWGP money race when everyone else is bound by the official rules?

    0 Not allowed! Not allowed!
    It's all water under the bridge, and we do enter the next round-robin. Am I wrong?

  5. #30
    Member lee955i's Avatar
    Join Date
    Sep 2002
    Location
    Winter Haven, FL.
    Age
    58
    Posts
    178

    Roll or plant after high-siding?

    Originally posted by Paul_E_D
    Lee, Have you done the trick where you shorten the crossover pipe on the stock exhaust to pull the closer together? That's an essential mod if you want to go fast on an EX. It buys you some ground clearance. Rearsets are good too.
    Haaa, yep. I did it last night as a matter of fact . Hopefully that wont happen again, and, I already have woodcraft rearsets. I just need to get my ass off the seat a bit more .
    Oreo, I don't usually run anything but practice on Sundays. Last week though, I ran Lightweight Superbike to make up the race I crashed in earlier this year so I can advance for the September round. Was having a good race, too, running midpack on a PT bike when I crashed in 2 trying to get under an FZR. Soooo, i'll probably have to run it again this weekend.
    Cheers, Lee S.

    0 Not allowed! Not allowed!
    I know i'm slow, you don't have to rub it in.
    Why, Yes! I do think you're a Wanker!

  6. #31
    Lifer a13x's Avatar
    Join Date
    May 2005
    Location
    Warner Springs, CA
    Posts
    6,583

    Roll or plant after high-siding?

    Originally posted by hessogood
    I was looking at results yesterday,, and here's a great question. Who is it that permits Wood to run his gixer 1000 in the MWGP money race when everyone else is bound by the official rules?
    Jeff doesn't run his 1000 in MW. You'll notice for a few racers that are out there on different bikes during a weekend that the results sometimes lists the wrong bike.

    I chaulk it up to the person typing in the entries sees 'so and so' on one bike for the majority of the races and just assumes they ride that bike in them all. Human Imput error.

    0 Not allowed! Not allowed!
    Boston --> San Diego

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Wanted - Other | 8" aluminum siding
    By 01xj in forum Wanted
    Replies: 2
    Last Post: 09-21-20, 08:24 AM
  2. Wanted - Other | Handyman/Contractor for siding repair
    By Kazinator in forum Wanted
    Replies: 0
    Last Post: 06-01-18, 12:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •