Safety Wiring Saturday 8/22

[CEO]

I am going to be safety wiring my bike tomorrow (Joel may be joining as well).

I should have pretty much all the supplies anyone might need. (wire, tapmagic, sw pliers, several drills, and also I am planning on picking the mini drill press attachment for my dremel and using that on low speed in conjunction with a small machinist's vice).

I was wondering if anyone else needed to do this, hopefully someone with a bit of experience to give a hand/pointers. Or even if you don't need to do it, come by and I'll buy your lunch and stuff.

It'll be happening at my garage in Wayland, MA.

Tonight I'll be grabbing the rest of the supplies (small machinist's vice, a bunch of metric nuts to secure bolts in the vice, the dremel drill press attachment, center punch, a bunch of bits, etc). Let me know if there's anything I'm missing.

PM me or call my cell if you could help. 5 oh eight - eight 6 8 - oh 4 oh four

[Crash Dummy Denno]

[CEO]

Come do your R6 and help me... you know you're going to need to eventually if you want to find those lost seconds

[Crash Dummy Denno]

Come do your R6 and help me... you know you're going to need to eventually if you want to find those lost seconds

ok maybe, if its good weather though, im going to the beach instead

[brendanp]

Come do your R6 and help me...

LOL...He can barely tie his shoes!

[Jim]

LOL...He can barely tie his shoes!

or get chicks

[Crash Dummy Denno]

i have had a rough couple of weeks and am barely hangin on and you guys go an post stuff like that...

[lady flyin' low]

i could be wrong...but i believe saturday is the 23rd

[CEO]

i could be wrong...but i believe saturday is the 23rd

Oops yeah you're right

chris i might be bailing on you to go riding saturday morning with babes, and then i'll be getting ready for that shinding all afternoon. i have a center punch, and like 4 or 5 Ti tipped bits. all my stuff is still in plymouth

Alright, you suck.

I'll probably be doing it anyways if anyone wants to help and/or do theirs.

Denno lemme know...

[Kitt]

chris if you wanna ride out to springfield tonight or tomorrow during the day, I have a drill press and have done a few dozen bolts.

[GixerJockey]

Come do your R6 and help me...

Help you???



NO... CUT... FRAME... SLIDERS...

[BLACK SQUIRREL]

Help you???



NO... CUT... FRAME... SLIDERS...

= NO SLIDE FRAME SLIDERS

[brendanp]

i have had a rough couple of weeks and am barely hangin on and you guys go an post stuff like that...

Aawwww...come on den, you kno we luv you!

[CEO]

chris if you wanna ride out to springfield tonight or tomorrow during the day, I have a drill press and have done a few dozen bolts.

Thanks Chris I'll let you know if I decide to do that. I'd prefer to do it at my place in Wayland but if no one else is gonna meet up and I get nervous about doing it I might take you up on that.


Do you have to do your banjo bolts? I'd be really fucking nervous doing those because they're mostly hollow.

[Crash Dummy Denno]

Thanks Chris I'll let you know if I decide to do that. I'd prefer to do it at my place in Wayland but if no one else is gonna meet up and I get nervous about doing it I might take you up on that.


Do you have to do your banjo bolts? I'd be really fucking nervous doing those because they're mostly hollow.

no

[CEO]

no

Don't you fucking get short with me. Don't talk to me in that tone. Christ...

[Tricky Mike]

the head of the bolt isn't hollow, is it?
I've wired them in the past (carefully), but it's not necessary.

[CEO]

the head of the bolt isn't hollow, is it?
I've wired them in the past (carefully), but it's not necessary.

You're right the head isn't usually hollow... just in general they are fragile and I've had them shear on me... drilling into them would just make me a bit nervous.

There's some beers and lunch for you if you get bored tomorrow and happen to ride through Wayland...

I'm thinking I'll for a little rip afterwards too

[Tricky Mike]

There's some beers and lunch for you if you get bored tomorrow and happen to ride through Wayland...

I got a date with Mongoose, a putter and a windmill.

http://www.youtube.com/watch?v=d8pvD_4Pd1A&feature=related

[CEO]

Aww a minigolf date with Dan? That's cute.

[Tricky Mike]

Don't try to cheapen what we have together.

[ZipPhReaK]

A little bit of grease or oil helps to cool down the bit when drilling. Take it slow and easy, it's not fun trying to drill out broken drill bits.

Chris your a pro at installing bodywork right? I'm getting my armour bodies probably next week

[CEO]

A little bit of grease or oil helps to cool down the bit when drilling. Take it slow and easy, it's not fun trying to drill out broken drill bits.

Chris your a pro at installing bodywork right? I'm getting my armour bodies probably next week

I got all the supplies I was missing and now have a full safety wiring setup... I ended up not doing it though. Attendees bailed on me and I have all winter to do it so no rush. I decided to build my workbench since that keeps getting procrastinated on.


And yeah the armour bodies is nice and pretty easy to install. I had help with mine which was nice... it's not too bad of a job though. You have the Dzus fasteners already? Have a holesaw for your frame sliders?

If you need things I have most shit. Or you could bring the bike by and I could help you do it all if you wanted.

[Mr. Kurtz]

Chris, you still planning on doing Penguin this Friday?

[CEO]

Chris, you still planning on doing Penguin this Friday?

Hey Mike... I don't think I was ever planning on doing this Friday's penguin... my plan was always to try to do the friday penguin on september 26th... that's still my plan if I can scrape together the money and time

Why, you gonna do it too?