0


So everything got soaked yesterday in my 1st race at Summit. Boots, suit, gloves, etc are still water logged today.
What's the best way to dry these things for when I go to NHMS Friday?
I haven't checked the weather back home yet to see if laying them outside will be the best solution.
Lay them down and have a couple of fans pointed at them
You're talking about the helmet fan concept basically? I don't think Jim is familiar.
I went to MMI I know what Im doing here chief
http://www.rscycles.com/product_p/hangair.htm
For the suit
The boots should dry just fine as long as they are out in the open where they can get some air
Gloves too. really.. If you need to hurry them along you could put them in the dryer on no heat.... It's best to pull them out and jamb your hands in them once in a while to keep them in shape..
I just washed my gloves and they only took about 2.5 days to dry out sitting on a towel on the counter.
The older I get the Faster I wuz
For the suit: http://handmakemyday.com/2011/05/05/...urf-kayak-ect/
-Pete
NEMRR #81 - ECK Racing
Cyclesmith Track Days
Woodcraft | MTag-Pirelli | OnTrack Media
'03 Tuono | '06 SV650 | '04 CRF250X | '24 Aprilia Tuareg
The suit dryer mentioned above, a basic fan for the helmet, and a boot dryer.
Mike K. - www.goMTAG.com - For Pirelli tires, Moto-D tire warmers, and Woodcraft parts
LRRS/CCS Expert #86 / RSP Racing / Woodcraft / MTAG Pirelli / Dyno Solutions / Tony's Track Days / Sport Bike Track Gear / 434racer / Brunetto T-Shirts / Knox / Crossfit Wallingford
R.I.P. - Reed - 3-23-2008
Buy spares. I got them for sale and includes a suit dryer.
Yup, do you ski/board? They have them in lodges.
You can make these pretty cheap actually for one suit out of PVC.
http://www.fire-end.com/graphics/Ram%20Air%206mu.jpg
-Alex
I can resist everything but Pete's mom.
I have a suite, boot, helmet , glove dryer that puts out heat. Your welcome to barrow it anytime.
Adrenaline Cycle
Swansea,MA
Dyno Jet Tuning Center
Apparel
Fabrication
Powder Coating
Paint
Service
Engine service
Race Bike Prep
Used OEM Parts
Track bike rentals
ADRENALINECYCLEINC.COM
Like us on Facebook
[IMG]http://www.facebook.com/AdrenalineCycle1?ref=hl
Mike K. - www.goMTAG.com - For Pirelli tires, Moto-D tire warmers, and Woodcraft parts
LRRS/CCS Expert #86 / RSP Racing / Woodcraft / MTAG Pirelli / Dyno Solutions / Tony's Track Days / Sport Bike Track Gear / 434racer / Brunetto T-Shirts / Knox / Crossfit Wallingford
R.I.P. - Reed - 3-23-2008