0
took a tip coasting down a hill and bopped the master cylinder...since then, when you grab the front brake, there is no pressure.
If you pump the lever a few times, it will build pressure and hold it, but if you let the lever go about halfway, all the pressure is released.
I unbolted both of the banjo bolts, emptied/cleaned the master cylinder, used a vacuum pump to pull fresh fluid through the system, but it's still the same...
google doesn't match my specific scenario, so the only thing I can guess is a seal with the plunger in the master cylinder popped when I fell...I either need to rebuild it, or start replacing pieces (brake lines and/or calipers) until it sorts out
anyone experience this or have an idea of how I can fix my current system?