0


I have 2 pairs of brake pads sitting in front of me and I'm trying to decide which one to put on my R6? What do they go for new and which is considered better?
need more info. which compounds are they? I've run Galfer HH in my old bike and they were fine. not sure what was in my 600 before, might have been stock and they were fine. switched to Vesrah SRJL-17 ($160 for both calipers) and they are awesome
LRRS Am #331
Graphic Tailor / Woodcraft / Armour Bodies / Suomy / Cycle Performance Autobody / Shorai / ChickenHawk Racing
I like the Vesrah RJL much more than the HH's I had prior.
either should be fine. i'd do with whatever has more material left on it.
but like brett said, compound matters.
more importantly, what have those rotors been using?
if you're not resurfacing the rotors, they could get glazed if you keep switching compounds around.
Neither.
-Christian LRRS/CCS HasBeen ECK Racing
2011 Pit Bike Race CHAMPION!
One of those specific compounds and types are great for the type of riding you mentioned. But one is horrible, nearly dangerous to use for what you said.
Last edited by TheIglu; 04-09-13 at 10:09 AM.
2021 KTM Duke 890 R
2020 BMW R1250GS Adventure Exclusive
1982 Honda CB750F Super Sport
Oh, I get it, it's a guessing game! I'll go first:
Is it these Vesrah's?
If so, then no, they won't work well on your R6. Unless your R6 is a CB400.
Last edited by TheIglu; 04-09-13 at 10:09 AM.
2021 KTM Duke 890 R
2020 BMW R1250GS Adventure Exclusive
1982 Honda CB750F Super Sport
Is it these Galfers?
No, those are black compound and are best for the rear brakes. Oh...wait...you didn't mention which end of the bike. YAY! MORE GUESSING!
2021 KTM Duke 890 R
2020 BMW R1250GS Adventure Exclusive
1982 Honda CB750F Super Sport
vesrahs...or get some performance friction ;-)
CCS/LRRS EX #226
LOW DOWN RACING
Current stable:
2008 hyper 1100
2007 crf450r
2009 yz450f
2008 sikk mx 125 minimoto
LRRS Am #331
Graphic Tailor / Woodcraft / Armour Bodies / Suomy / Cycle Performance Autobody / Shorai / ChickenHawk Racing