0


My 04 ZX-6R has a coolant overflow tank underneath the gas tank that I need to empty for VIR. I can not figure out anyway to undo the bottom hose to let it drain out. I'm thinking I will need to use some sort of suction and suck it out of the fill cap on the top.
Any ideas?
--HBerry
LRRS# 285 - Retired
04 ZX-6R
88 EX500 - Broke
yep, syphon it out Mike,
degs
Shop vac and little hose
it has to connect to a radiator near the top
pop it off there and hold down into cup
Glen Beck is John the Baptist
I'll procure a turkey baster on saturday to suck it out.
--HBerry
LRRS# 285 - Retired
04 ZX-6R
88 EX500 - Broke
Why does the coolant overflow need to be emptied?
Shouldnt the bike naturally suck the stuff back out of the overflow tank once the bike is all cooled down??
EVERYTHING is a repost
06 749R #0047
08 R 1200 GSA
13 Monster EVO 1100
Yes there is a Low and High level on the overflow, I'm guessing its also a reserve in case the coolant gets low, and there is a tube at the very top of the overflow so that it can spill out if it gets too high. I will use a turkey baster and suck all the goo out, then flush the coolant system again and then fill it up.
Then put the bike together, hope everything is good to go for safety wire, put it on the truck, strap it down, and maybe by that time we will know what the fuck we are doing for getting bikes to VIR
--HBerry
LRRS# 285 - Retired
04 ZX-6R
88 EX500 - Broke
I'm in Montana.
Last e-mail I got, we were still unsure about what everyone was doing? Did someone forget to press the reply all button?
--HBerry
LRRS# 285 - Retired
04 ZX-6R
88 EX500 - Broke
"She's going from suck to blow" - Spaceballs
She likes to do that to me!
--HBerry
LRRS# 285 - Retired
04 ZX-6R
88 EX500 - Broke