0


I'm guessing the pins from my '04 GSXR 6 would work, unless they made some major changes.
I might not be using them around that timeframe - my bike is garaged at NYST during the season and I think they'll be running a little past their "official" Oct 12th end of season if the weather holds.
Touch base with me as the time approaches if someone else doesn't have a solution for you. Dove has my phone #.
"Where are we going?...and why am I in this handbasket?"
LRRS 919
'12 Ducati 1199 Panigale (track) '08 Honda CRF 250 (ice) '02 KTM 520 SX Supermoto (track)
I can grab them from him anywhere in the central or metrowest MA
Ducky, your pins are different according to their Fitment Chart
Ok, well if you get desperate you could take a caliper to the inside of your axle (both sides) and then measure the length of the axle.
Not sure if there's a big difference between our bikes but I can tell you that I've used a buddy's pins that were for a CBR 1000RR with no problem, even though it's a different pin on the fitment chart....there was just the tiniest bit of extra free play.
"Where are we going?...and why am I in this handbasket?"
LRRS 919
'12 Ducati 1199 Panigale (track) '08 Honda CRF 250 (ice) '02 KTM 520 SX Supermoto (track)
Ever since I got the two bike trailer (which is not setup yet for TRS), I have not been using my TRS. I have two sets of pins - 848 & RSV4 - if either of those work for you, you are welcome to come and get them. I live in Southie.
I've got the right pins for an 06-11 GSXR. Let me know if you want 'em; pickup in Hopkinton MA.
The 00-05 GSXR axle is nearly identical (openings are the same ID) but is a bit narrower IIRC. You could use the 00-05 GSXR pins if you drilled a new retaining hole in either of the pins.
Sure thing - shoot me a pm to hash out details.