0


GX 160 engine still good. The rest of the machine is pretty well used.
Blew out the drive pulley last winter however it is repairable if you wanted to put the time and money into it.
Can transport between Concord, NH and Wilmington, MA during the week.
I failed to mention that pick up is possible. PM if you're interested otherwise it's going to the curb this weekend.
Tires or tracks? Any idea how old?
Last edited by Tekime; 04-12-17 at 11:42 AM.
05GSXR75005SV65090DR350
Tires.
1987-ish
Cool thanks. Have a friend that might want it but it's a long haul from here, so probably not..
05GSXR75005SV65090DR350
great minibike motor!
Beta 200RR
Free engine for a wood splitter, generator, go kart, compactor, air compressor, pressure washer......
A stated earlier, this machine is repairable. The chute is in great condition. Just needs some time and effort to make it right once again.
When you say you blew out the drive pulley... what does that mean exactly?
2003 ZX7R
1995 916
It means I need to post a picture.
The bearing for the drive idler pulley let go....The one the contacts the belt when the operator squeezes the handle...And chewed through the bolt that mounts the idler to (what I will call) the actuator arm.
I realized a pic is more effort than I want to put in.
For $60 in parts and a couple belts someone can have a decent snow throwing machine.
For $0 and a road trip someone gets a free Honda engine for their Barbie Lamborghini (ahem.....Mike!)
Think it would fit in the back of a VW Golf with the handles unbolted?
No idea.
What time do you usually pass 111/Windham during the week?
2001 Silver ZX-12R... RIP
2005 KDX 200
It varies slightly but I am frequently in that general area.
Depending on the day, anywhere between 5ish and 7ish
Last edited by butcher bergs; 04-21-17 at 11:11 AM.
Which day are you thinking?