0
I bought this bike new at cycles 128 in 2003. It has some mods done to it.
Acerbis hand guards
Scotts tripple clamps (forget the offset but they made it steer quicker)
Some fat handlebars
Suspension re-valved for woods, sprung for a 200lb rider, by GMD
V-force reed cage/reeds
JD jetting kit
FMF Gnarly pipe
Fastway pegs
New piston/rings, cylinder and head was ported at Cycles Playground
Moose tall seat
Pirelli MT16 front/rear tire, heavy duty tubes
recent chain/sprockets
TM chain guide
skid plate
I have the manual/shit that came with the bike
Most of this stuff has five rides/40 hours use on it - top end, suspension, hand guards, tires, chain & sprockets. I did a bunch of work to the bike last spring and only rode it during my trip to Hatfield McCoy. The bike ran great.
the bad.
Odometer doesn't work, cable was ripped off
the rear tire is about 60% worn
I have no title/MSO, never registered the bike.
The bike looks clean in the pictures, it isn't. (I did take the pics today)
the pipe is dented. I dropped the bike onto a rock, the pipe got dented, and I've had a hard time getting it to seal on the head since then. Basically the pipe wants to rattle, it's sealed up with high temp RTV now, but probably won't last forever.
$1550
Reply With Quote
Originally Posted by feralchimp
