0


Need to sell my 2003 RC51.
10,000 miles will vary because im still riding it
pazzos black and gold - small scuff on the end of clutch side, both function and look great
Custom undertail exhaust with ti simon kobe gp cans and stainless mids and headers (now wrapped)
pc3 with tune
speedo healer
15/42 gearing
stainless braided lines for front brakes and clutch
vortex clip ons
frame sliders
all free mods done
Bike has clear title, never been crashed or down.
the bad
Paint on swingarm is coming off in places but no gouges or scratches in the metal.
has a crack in the upper where the tie down cracked it. (about 2 inches)
has a crack in the right side fairing where the front wheel came off the ramp and the bike landed on the ramp. has been fixed with epoxy but not repainted.
asking 7000 as it sits or 6500 all stock. if you need more pics or have more questions call me or pm me 781-975-0079
__________________
Tuono
aprilia shiver or maybe a triumph street triple is what gives. i kinda jumped into this one without really thinking. it really doesnt suit my riding very well. i commute alot during the week as well as hit the twisties on the weekend and i have a real hard time commuting on this thing. need something with a bit more upright riding position thus the aprilia
Tuono
How about an R1.
I commute from Weymouth to Waltham daily on it. Bike will keep you ass warm too. Is an added benefit.
na, dont really want an i4.
Tuono
is it that you dont want an I4 or you just want the more relaxed standard style riding position? the FZ1 is a pretty sweet ride with the upright position as well. also have you looked at the KTM duke? all the bikes you mentioned already are badass as well, i just like to offer my $.02.
i dont want an i4 for a motor. i actually like the looks for the fz series as well as kawis z1000. i just really like the twins. i looked at the duke but not diggin the looks.
Tuono
haha i know its a triple, kinda of a inbetween i was considering.
now back to the thread, someone buy this beast
Tuono
Trade you the TLR!
Nice looking RC, really like the custom exhaust.
The bikes you are looking at are very nice, take a second look at the Duke. I rode half squids last season and it was awesome. It handled great (better balance than the RC, and felt much lighter), comfortable and had plenty of motor (not as much as the RC but more refined). After riding I did want to leave my RC (sold now,) in his garage.
Good luck selling the RC, if you want to try and make it more comfortable I do have a set of brand new (never used, had a couple of sets) OSF adjustable rearsets that I would part with at a reasonable cost. That would make the ride more comfy.
Jamie
skiierx,
i think i was going to go sit on the duke just for grins, never know.
as for making the rc more comfortable, i feel that it would changing the overall character of the bike. its such a nice package as it sits now but just the wrong package for my riding.
Tuono
bump, now all back to stock
Tuono
2002 RC51
-Aluminum undertail, custom GP Can and mid-pipe, Jardine 2-1 Header, PC3, EBC Wave Rotors (F&R), CRG's, Goodridge SS Lines, Greggs, Black w/ Flattening and some carbon goodies
USMC - Semper Fi
POW/MIA - Not Forgotten
bike is completly bone stock except for the stainless lines frame sliders and vortex clipons.
i got a pc3r with a sato bonzai map, pazzos, and the exhaust we fabbed including the headers. some guy says hes interested and i didnt get the post till after i pulled everything off so ill give him a day or two before i start parting the goodies out.
Last edited by catch2otwo; 05-17-08 at 12:54 PM.
Tuono
couple more pics
![]()
Tuono
well im interested in one of those cans if the exhaust doesnt go with the bike.
2002 RC51
-Aluminum undertail, custom GP Can and mid-pipe, Jardine 2-1 Header, PC3, EBC Wave Rotors (F&R), CRG's, Goodridge SS Lines, Greggs, Black w/ Flattening and some carbon goodies
USMC - Semper Fi
POW/MIA - Not Forgotten
ill probably have a seperate for sale thread up by thursday if the stuffs not gone. keep your eye out
Tuono
2002 RC51
-Aluminum undertail, custom GP Can and mid-pipe, Jardine 2-1 Header, PC3, EBC Wave Rotors (F&R), CRG's, Goodridge SS Lines, Greggs, Black w/ Flattening and some carbon goodies
USMC - Semper Fi
POW/MIA - Not Forgotten