1


*SOLD*
Selling this CORTECH luggage set, side and tail bags, all in good shape, zippers working, lots of pockets, many attaching straps, and rain covers.
Look to be quite rugged for soft bags, and very roomy, these will hold a lot of stuff. Heavy duty, not lightweight.
Came with a Guzzi V11 Lemans that I bought and have since sold, the new owner didn't want.
In Arlington MA, with EZ access from MA Route 2 and Mass. Ave.
$75 NESR price. ($95 on FB)
Attachment 58579 Attachment 58580 Attachment 58581
No, the crate is NOT included.
Last edited by whynot; 03-05-23 at 10:03 AM. Reason: *SOLD*
And don't believe everything you think.
Ever try fitting this setup on your Hyper?
Matt, never did try them on The HYM796. I don't think there's enough to the plastic exhaust covers to support the side bags. Unless you stacked something else first on the seat and wing to build it up several inches, like with a drybag, then load these bags on top.
(I always thought of the Hyper as "luggage challenged," but the Wolfman small enduro tank bag worked well.)
Attachment 58587
Last edited by whynot; 11-21-22 at 11:52 AM.
And don't believe everything you think.
Meant to say $75 NESR price. ($95 on FB)
And don't believe everything you think.
Is this meant to go on a passenger seat?
Your park avenue leads to..
Yes. Helps if you have a luggage rack, too,even a small one. Too bad I didn't get a pic of the bags on the Guzzi. The bags sat on the passenger seat and the luggage rack, if you can picture it without the small tailbag. Would work even better with a longer passenger seat.
Later today I'll take some measurements and report back.
![]()
Last edited by whynot; 11-26-22 at 07:10 AM.
And don't believe everything you think.
OK, I measured the CORTECH bags --
Top bag:
16" wide
14" deep (length front-to-back)
9" height
Side bags:
16" long
8" wide -- with expansion zippers to go wider and pack more stuff
12" height
The tunnel is about 10" wide, more or less depending on the width of your seat and how much the side bags would droop.
IMO, these bags would be *PERFECT" for a bike with a bench seat, let's say, hypothetically, a Triumph Scrambler 1200 f'rinstance.
Also, a Nelson-Rigg outdoor bike cover comes with the set -- it was stuffed inside the top bag, I'm guessing the seller forgot it was there.
It's a big cover, would no doubt work well on, let's say, hypothetically, a Triumph Scrambler 1200 f'rinstance.
[EDIT -- cover is gone.]
Last edited by whynot; 03-04-23 at 01:24 PM.
And don't believe everything you think.
Haha. I was actually thinking of them for the passenger seat on my street bob
Your park avenue leads to..
This didn’t work on any of my bikes without touching the exhaust. Now just hangs in my garage.
Free to anyone who wants to actually use it!
Your park avenue leads to..