0
-Christian LRRS/CCS HasBeen ECK Racing
2011 Pit Bike Race CHAMPION!
this sounds like the year of everyone putting it off to the last minute.
LRRS Am #331
Graphic Tailor / Woodcraft / Armour Bodies / Suomy / Cycle Performance Autobody / Shorai / ChickenHawk Racing
Well...after some spec checking, side to side play on the connecting rod is just at tolerance. Looks like she's getting a new crank and bearings as well. Gonna go with the hot rods. Anyone want to buy a kidney?
I do have a spare crank well within the tolerances, but if I'm going to split the cases, may as well put the good stuff in there. Thoughts?
Last edited by JettaJayGLS; 03-01-13 at 06:43 PM.
A man of many names...Jay, Gennaro, Gerry, etc.
-Christian LRRS/CCS HasBeen ECK Racing
2011 Pit Bike Race CHAMPION!
Executive Distributor - ItWorks! Global
All-Natural Health, Wellness and Beauty www.kchristian.myitworks.com Supplements, Skin Care, Energy Drinks, and MORE!
If you run into a wall with a helmet on, you still ran into a wall.
one season i was all ready to go. except 2 weeks before the first weekend and my bike was under 4ft of water.
When I start my KTM in the morning, rules are broken. Its inevitable...
01 SV650S (RC51 eater)/07 690SM /03 300EXC/14 XTZ1200
TRACKS:Firebird/NHMS/VIR/Calabogie/California Speedway/NJMP/MMC/NYST/Palmer/Thompson/Club Motorsports
JettaJay if you need anything let me know I have stuff that I can't use from the 03 I had,
http://www.youtube.com/watch?v=3tWFMDcK3Tk
A Little Vid From Ice Riding Today
Thanks Adam, the fact is that I'm going new on all parts in there that need to be replaced...gonna be a pretty penny, but now I'll know exactly what I'm dealing with and that everything is in new condition. Should last me a bit as well. For the time being I'm going hot rods cam and bearings, oem gaskets and seals, oem waterpump impellor, bearing, and seals, new wiseco 12.5:1 piston (what I ran last season), reusing the boyesen impeller and water pump cover, and reusing the hot cams stage 2 cam I ran last season as well.
I'm undecided on valves at the moment, if I want to do them or not. As far as I know, I ran stock valves last season. Sorting out the head will be an April project.
Last edited by JettaJayGLS; 03-04-13 at 03:33 PM.
A man of many names...Jay, Gennaro, Gerry, etc.
52
51 Days
50 Days !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
still nothing about a rulebook?
just put up on facebook an hour ago. its too big to upload on here so if someone else knows how to do it its in the LRRS group page on fb
LRRS Am #331
Graphic Tailor / Woodcraft / Armour Bodies / Suomy / Cycle Performance Autobody / Shorai / ChickenHawk Racing
For those of us not on the book, its on the LRRS Homepage as well.
http://www.lrrsracing.com/2013/2013_LRRS_Rulebook.pdf
A man of many names...Jay, Gennaro, Gerry, etc.
hopefully next month is starts getting warmer.
I've been putting off ordering new front brake rotors. Pulled the trigger this morning to find out there's a 3-4 week backorder from Germany. Glad I didn't wait too much longer as I'm expecting that's an optimistic estimate.
LRRS EX #7
Low Down Racing
- Woodcraft - Armour Bodies - Computrack Boston - Lifeproof -
whats good with the Eject thing?
Wirelessly posted
Really? ( shakes head)Originally Posted by tsorfas