2


Headed out for an early ride this morning to beat the heat,![]()
![]()
OOOO the hotties out jogging and dog walking
![]()
Nice little 400+ mile jaunt this weekend. Took back roads up to Jay Peak Saturday & spent the night at the resort (more on that later) with a bunch of peeps, then more back roads on the way home. I can't even begin to list the routes we took, but we hit a few of the old goodies that I haven't been on in FOREVER. This is about the only time I remembered to take a quick pick - it was on the way up.
Jay Peak Resort during the summer? Don't do it. Just don't. Total bore, way overpriced and everything on campus closes by 9:00pm, most at 8:00pm. There were 16 of us and we were rarin' to tear it up. Obviously none of us wanted to ride the bikes to the local town for some drinking & what not, so we were relegated to getting rowdy in the hotel rooms. Thankfully there was a wedding party staying as well and they pretty much took the attention off us.The restaurants were meh, and service varied greatly. Not a place I'd stay again, summer or winter.
![]()
Did you grit your teeth and try to look like Clint Fuckin' Eastwood?
Or did you lisp it all hangfisted like a fuckin' flower?
Jay Peak is 18 miles from my brothers camp in Lowell (about 10 as a crow flies) Best entertainment in that neck of woods is the entertainment you make for yourself, horseshoes is a popular sport
RandyO
IBA#9560
A man with a gun is a citizen
A man without a gun is a subject LETS GO BRANDON
WWHHHOOOOEEEEEEE!!! Those tar snakes REALLY come alive in this weather![]()
AK550 this morning, K-Pipe this afternoon just to change it up, and maybe go for a UTV cruise after that, at least to get gas
RandyO
IBA#9560
A man with a gun is a citizen
A man without a gun is a subject LETS GO BRANDON
Colorado Route 149
![]()
“It's 2 minutes for any capable adult.”
Multi is nearly there![]()
I figured out my last obstacle in getting it back on the road. The new Zard exhaust removes some and reuses some OEM tail light/mud guard assembly. I'm also replacing the terrible OEM brake light with an LED unit from CompWerks that's much brighter. Zard does not include installation instructions, just an exhaust and bag of assorted hardware. Anyway, I have to extend the factory tail light harness about 6" to reroute it a bit, then I can bolt it all together. Then just need to reinstall the nose cone and side fairings and she'll be road ready again.
This is going to be such a better Multistrada. Bullet point of the mods/work:
* New Zard full system
* New 48t EVR clutch/open cover (the old one was slipping)
* New Sargent seats
* Valve clearances and new belts
* LED tail light
* Oberon clutch and brake master covers
* Oberon foot pegs (factory ones are slippery)
* Full fluid change
Probably about 40-50 hours of work into this reno, took me 8 months to get through that! Bike was mostly good to start, now it should be great. When we hit the off season I'm going to pull the forks and shock for a refresh/respring and correct raise the bike back up. Lowering link is fully collapsed and the forks are about 2" up in the triples for the PO's....vertical challenges.
I went to MMI I know what Im doing here chief
^^ Let's see some pics of the newly improved Multi.
Also, 30" inseam isn't all that challenged.
And don't believe everything you think.
Rode from Worcester to an Air B&B in Belmont, VT. Any road recommendations fir the area?
2019 Triumph Scrambler 1200 XE
2022 Husqvarna fe501s
Check out the "other" NE Riders
https://www.newenglandriders.org/b-o...locale=Vermont
And don't believe everything you think.
My commute is great from North Adams to Pittsfield (sometimes Lenox) rolling on Rt 8 to US 7, but I love that US 7 from the top to the bottom of Mass. Such a nice mix of mountains, town, and some small highway driving.
I rode 7 from Williamstown to The Mount in Lenox on Sunday.. man what a great ride.
I won't lie I am still terrified to get out on the interstate. I am thinking about exploring up and around 116, 8A, 9, US 20, etc. Thoughts or suggestions?
Rt 20 in the Berkshires is very good.
2019 Triumph Scrambler 1200 XE
2022 Husqvarna fe501s
I'm going to give away a lot of my knowledge of good VT motorcycle roads...
140 from Mt Holly to Poultney is a gem.
Winhall Hollow Rd, Mountain Rd past Stratton, Stratton-Arlington Rd and Rt 100 back north is a excellent stretch of twisty pavement. 11 from Londonderry to Chester is pretty decent, while 121 into Grafton is better but dirt.
131 through Cavendish, 106 to Reading, then Tyson Rd/Town Hwy 1 has some really great twisties and views. Then loop up over Okemo via Okemo Ridge Rd.
100 north from Ludlow up to Stockbridge is pretty good, throw 100A into that as well which is better than 100.
If you want dirt as well, Puppy Dog Route, Dirty Dog Route and NEBDR all go through that area.
I have GPX files of a lot of this stuff if you're interested.
Last edited by SRTie4k; 08-16-22 at 07:42 AM.
2023 KTM 890 Adventure R
I was thinking of hitting part of the Puppy Dog, but I don’t have all my gear with me and can probably only excuse myself from family activities for a couple hours/day at most. We’ll see, I may get there. I’ve got the GPX with me, so I have the option at least. I swapped my AX41’s for my Shinko 705’s for the ride up here, trying to save on wear and tear. How friendly is the route for 70/30 tires?
Thanks for the street recs, I’ll definitely hit those!
2019 Triumph Scrambler 1200 XE
2022 Husqvarna fe501s
Puppy Dog can be done on a Harley with street tires, it's very easy. Most of Dirty Dog "main" route and NEBDR in that area can also, but there are more class 6 sections that would be better done with 70/30 tires...the expert sections on either though I'd only recommend with aggressive tires and a decently competent rider.
I personally wouldn't hesitate to ride any of them on 705's really. I'd even probably do the expert sections on 705's, as it's been extremely dry this year.
Last edited by SRTie4k; 08-16-22 at 07:57 AM.
2023 KTM 890 Adventure R
And don't believe everything you think.