0
![Not allowed!](https://www.nestreetriders.com/forum/images/buttons/down_dis.png)
![Not allowed!](https://www.nestreetriders.com/forum/images/buttons/up_dis.png)
I was told not to look on the nesr for the next 2 days so I don't keep calling my S/O wondering what we should do, when to go, where to pit/camp....ok I'll try..thank god I am working,gives me something to do![]()
Wirelessly posted (BlackBerry8130/4.5.0.138 Profile/MIDP-2.0 Configuration/CLDC-1.1 VendorID/105)
No, ill just race the r6 for round 1. Ill be missing round 2 so that gives me until round 3 to get it togetherOriginally Posted by lrrs428
Zip-Tie Alley Racing
LRRS/CCS #103
PPS | Dunlop | Boston Moto | Woodcraft & Armour Bodies | 35 Motorsports | Pit Bull | K&N
ohh well at least that gives you some time then
im ready haha
Plaistow Powersports Racing
Lrrs/ccs/ahrma EX #26
Quick Question....
I am racing this weekend for the first time. How do #'s work in all this? I did get the race plastics on but have not had a chance to paint them and wont until after the BoMo track days after the races.
Do I need to bring some paint as I will need #'s on a certain back ground color.... I just want to be prepared for as much stuff as possible.
I'm hoping to meet some of ya up there and get someone to give my ride a once over to be sure I did everything correctly... Even if you need to molest it a bit.
AND.....I'm getting butterflies already..It must be getting close....
Last edited by FireboltEric_MA; 04-21-10 at 09:46 AM.
Make sure you have a white background on the plastics where the numbers will be, then when you get your number assigned at the end of the day Friday, you can buy stickers from the vendors at the track (Street and Comp, BoMo?, anyone else?)
Roland Arsenault
LRRS and USCRA #763
2012, 2013 and 2015 Big Fish Small Pond Champion
"The 4 board is an upshift marker, not a brake marker"
So the white background is NOT a sticker... I guess I should go and paint my bike where the # will be ASAP...
Thank You!
my first season all i used was a roll of white contact paper from walmart, worked great
Plaistow Powersports Racing
Lrrs/ccs/ahrma EX #26
That is exactly what I want to do... I am thinking the white duct tape is a great idea to get me by till I get it painted correctly. That white contact paper may be another option. what ever will be easiest to get off, and stay on for the races....
Thanks for pointing me in the right direction. I was totally gonna paint it white w/ rattle can paint, but was dreading the sanding it off after routine...
1 Day and 46 Hours or for me TODAY!![]()
One time I was helping out a Penquin trackday rider. He decided to stay for a rookie race and a regular race. He had no plates. I used a couple of 5 gallon white plastic pails I found around the track. Cut them open. Cut out some oval pieces. Used my heat gun and flattened them. Drill some holes. Ziptied them on. Red duct numbers. Presto!
Hmm... think I'm going to roll up tomorrow bright and early instead of this evening. Too much traveling, still need to pack trailer...
Zip-Tie Alley Racing
LRRS/CCS #103
PPS | Dunlop | Boston Moto | Woodcraft & Armour Bodies | 35 Motorsports | Pit Bull | K&N