Extension cord covers

[Slowpoke387]

Did a quick search on here and Google but couldn't find any info. Anyone know who's got em?

[Doc]

http://cableorganizer.com/cord-covers/

[KB]

Go to any office supply store and get two you'll need at least 10 feet to cover where vehicles will drive over it.

KB

[Slowpoke387]

Wasnt sure what options there were, thanks guys.

[TTD]

Go to any office supply store and get two you'll need at least 10 feet to cover where vehicles will drive over it.

KB

FYI, I don't think the office supply ones are rated for vehicles... which is what they are supposed to be at the track.

[Rambunctous]

How about a couple of pieces strapping and set the circuler saw at 3/8 and run it up the middle a couple times. If u wanna get fancy u can then set the angle and make it ramp like. Cheap enough.

[Nazo]

I know last year they weren't strict but this year they may enforce this a little more. You are supposed to have a cord cover rated for vehicles as Tony mentioned above. They aren't cheap, but the office cord covers won't do anything to protect a cord from a vehicles weight.

[Slowpoke387]

Yeah, after a little more research I did find the vehicle rated ones are going to be needed. And I have a thick 30 amp cord to cover, so I'm not sure if those are big enough. Have to order some up and see how it goes...