Who's ready

[Pittenger5]

Is anyone actually 100% ready for next weekend? Bike, gear, everything ready to roll? Cause if so I hate you.
My bikes 1/2 safety wire, half put back together, need about 1000 zipties, gather up all my spares, find my boots gloves tire warmers in my room somewhere.
All along I knew I needed to get everything ready before the weather warmed up and I can ride, and of course I didnt. What did I do today? Safety wire the front end, and went riding.
But Ill be ready by next weekend! Dont fret!

[Doc]

Nope.

[senecak19]

Nope. More parts arriving tomorrow and hopefully some others arriving prior to my departure. I need to get some paint work done this week as well!

When's everyone going up?

[vintage ex race]

I'm almost ready , just need to go over the bike one last time will probably find stuff I've missed. Want to go up on Thursday but don't know if they will let me practice forgot to renew the license. Hopefully I can

[s a x m a n]

Almost done! Picked the bike up from Kates on Saturday and got her all together today.

Just need to change the oil, one last bleed of the brakes, and safety wire. Maybe 2 hours of work at most.

Heading up first thing Friday morning!

[zx1012r]

Going to VIR in March made me ready this year, but usually i am working late every night the week before the first weekend. I lubed the bearings in the trailer today just for something to do.

I still have to pick up an EZ-UP this week just in case my alternate garage accomodations fall through.

[CMG241]

changed oil and brake fluid today, got new Woodcraft tire warmers, a suit liner, chest protector, new Arai helmet last week and another leather (JRocket) suit couple weeks ago. Re-safety wire tomorrow and if some one lends me gas money I'm good to go Friday thru Monday!

[TheIglu]

Pulled the bike out of the basement yesterday, oil change, re-safety wired the drain plug, filler and filter. Put some gas in it (yes it actually runs BETTER with straight pump gas) and took it down the street to make sure she was happy.

Pulled the trailer out of the mud pit. Gunna tar the roof tonight and empty it out. Should be heading up to the track Friday AM.

[Crash Dummy Denno]

Is anyone actually 100% ready for next weekend?

[RyanNicholson]

i'm pretty close to ready....need to put a new master link on the new chain (rivet cracked while putting it on ha)....my superbike tail never came in so I gatta borrow the subframe from my street bike (not a big deal). Other than that I'm good, finished the brakes, oil, sprocket, etc this weekend...gunna have to put the new tires on it sometime this week before heading up for thursday practice.

also need to reg the trailer.

[TheIglu]

Anyone know how much more it's going to be to get into the gates this year?

[Kurlon]

I'm still waiting on a front tire after having to cancel one order due to a lack of communication... going to be pushing an older tire in back for now, joy. I need to safety wire the bike, put on a Battery Tender harness, and put on a new front brake line, and the bike will be good to go.

I'm pretty much set gear wise, other than trying to track down a set of tire warmers to borrow for the first weekend.

[Supah Dave]

Is anyone actually 100% ready for next weekend? Bike, gear, everything ready to roll? Cause if so I hate you.
My bikes 1/2 safety wire, half put back together, need about 1000 zipties, gather up all my spares, find my boots gloves tire warmers in my room somewhere.
All along I knew I needed to get everything ready before the weather warmed up and I can ride, and of course I didnt. What did I do today? Safety wire the front end, and went riding.
But Ill be ready by next weekend! Dont fret!

All I can say is.... You're a freakin' slacker! Put the street bike on the back burner and get your ass in gear. I didn't even have a motor in my bike 10 days ago but I'm all set to go now. Racing is THE priority and as such everything else should be put on hold until all preparatory work is done!!!

[SVRACER01]

gotta put the # plates on and bodywork mounted. need coolant, and safety wire the front end.

[BLACK SQUIRREL]

I am A brake lever and some #'s Away from being ready, Just waiting for the Damm clavicle to heal a little more

[DuncanMoto]

I only have about 100 different nuts and bolts left to install.
Bodywork is supposed to be painted tomorrow.

[senecak19]

- Need to paint one bike.
- Install a new drive train on another.
- Saftey wire both
- Get some number plates from comp (can't find glossy yellow adhesive backed material anywhere)
- Get a new rear tire
- There's more I can't think of, but a recent shoulder injury could keep me on the sideline this weekend. Pfffttt!! Fu**in BS.

[Doc]

(can't find glossy yellow adhesive backed material anywhere) .

Did you try ebay?

[Pittenger5]

All I can say is.... You're a freakin' slacker! Put the street bike on the back burner and get your ass in gear.

I just need a little pressure to work well! Who doesnt work better under the gun.

[s a x m a n]

changed the oil, bleed the brakes and drained the gas tank tonight.

Just have to torque everything down, safety wire and add numbers.

Friday can't come soon enough!!

[Pittenger5]

Yup, got ol shitter all set up tonight. Body works on, everything (I think) is wired up, got the spares all together, jsut gotta find my gear and I should be good to go

[butcher bergs]

Still need a bike...

(can't find glossy yellow adhesive backed material anywhere)

Parts Unlimited carries a supplier by the name of "FX Works" or something close to that name.

You can get 3 large rectangle sheets of the stuff for like 16 bux. They also offer pre-cut but I think it's mostly for dirt bike applications.

I can have some ordered up for ya just gotta let me know asap.

[OreoGaborio]

I need a race number

Other than that I'm just about ready to go minus the usual odds & ends.
I COULD do some things to the bike, but it can race as is.

[Evil_Weasel]

just needed tires, numbers and some last minute wiring.

till this happened....http://www.nestreetriders.com/forum/...he-weasel.html

[pasta-rocket]

I still need to get my motor from bruce myers wednesday night!
Then
Install it.
flash ecu
pick up my exhaust from kitt
new chain
mount all bodywork
and then break it in at the race!