Winter mods, what are you doing?

[eboos]

I am adding a fairing, constructing my own seat and tail section out of a custom mold, glassing up a new belly pan, adding an Athlon lap timer, relocating some electrical components, and adding a Penske shock.

[Woodsy]

Going from Red to white, powder coating rims, recovering seat in a different color, new rear pads, and adding an undertail. we will see how much i get done.

[Devil1]

Don't have a bike till Jan....

Soooo I'm taking my trailer down to the metal and re doing it in rhino lining.

[JohnnyV]

Most likely CRG levers, black case covers from the '08, possibly getting the rearsets powdercoated.

[Sheppo]

looking for an EX or GS track bitch...

[Kurlon]

looking for an EX or GS track bitch...

Paging 13uddha!

[GixerJockey]

Sv:

Repairing and painting bodywork, fabbing mounts and installing bigger radiator, carb synch and tuning, installing new chain adjusters, repairing exhaust can, installing case covers, GMDNY freshen up on Penske, installing steering damper, servicing brakes, oil change, new air filter, spark plugs, shave seat


GSX-R1000:

Elka Hydrolic preload, 3-way shock, RaceTech Gold Valves, .95 springs, possible brake caliper/master upgrade


Edit:

...and looking for a cheap pit bike.

[The Snowman]

CBR900RR, still up in the air

CBR600F3, DB windscreen, some plastic repair

Looking for an SV track/race bike

[burnham]

Finish the odds and ends that are left after my frame swap, maybe some new paint, and chop off some of the wiring for the headlights. Then a trip to computrack to see if the front end is straight. I had plans of a big-bore kit going in over the winter, but I don't see any extra money in the near future so that's out.

[k7gsxr1000]

1. AIR SHIFTER
2. 2BROS JUICE BOX
3. 2 STEP LAUNCH CONTROL
4. BROX EXHUAST SYTEM
5. K AND N FILTER
6. NITROUS EXPRESS DRY SYSTEM

[a13x]

RMZ 450
--------------
Alder slipper clutch
Tri-Starr offset triple clamps
Random bits and bobs...


CRF250
------------
LeoVince X3 full Ti system
New chain/sprockets
New tires

[BCT748]

A whole bunch of shit that will drain me of every penny I have

[Jaynnus]

put in some stab-il and standing by......

Is that a mod???

[seth399]

kx250: It's already too pimp so hopefully not much besides finally getting my new chain in stock/on bike

crf450:
put on my 17" wheels (after those get tires)
Braking front supermoto setup,
sometype of custom catch can
replace 'red' stuff with white plastics
put on cool new graphics and numbers
new lower rise bars for road stuff
sprockets/chain
maybe get some type of custom chain slider for top of swingarm
maybe toy with hacking up airbox to promote more airflow

[Kurlon]

GS500E:
- New base gasket and cam chain tensioner

GP Mono Project:
- Sell X4
- Buy YZ400F
- Make GP Mono Bike

CRF70RR:
- Swap in backup 150 motor for indoor racing
- Build 225 motor for 'bigger' tracks

CRF70:
- New front caliper, pads
- Tires?

[butcher bergs]

F4i
----
Dismantle down to frame and engine
Rebuild to perfection


FZ1
----
Race prepping for some NV liter-bike fun in 2009


FJR
----
Can't keep...must sell

[SVRACER01]

im gonna submerge my racebike in water again...that seemed to work out well last time

[SVRACER01]

FZ1
----
Race prepping for some NV liter-bike fun in 2009

dont plan on racing much huh?

[bryco13]

Finally getting a PC-III usb and DNA air filter, then getting it all tuned. Making a custom seat cowl, cause all the ones currently available for my bike are hideous. And hunting down the elusive pristine condition Erion 929 cbr.

[butcher bergs]

dont plan on racing much huh?

That's what the F4i is for.

I'm doing the FZ up just to see what I'm able to turn for times...prolly enter it in a handful of races.

It should be interesting.

[R7]

08 YZ450F

..Remove Motard parts and put dirt stuff back on (already done)
..Install ice screws
..Ride the bag out of it all winter
..re-install motard parts for 2nd race weekend

[schleppy]

My winter mod: Wishing I had a garage to wrench in so I could do winter mods.

[SVRACER01]

That's what the F4i is for.

I'm doing the FZ up just to see what I'm able to turn for times...prolly enter it in a handful of races.

It should be interesting.

as a NV your 1000cc classes are limited to 2 i think. GTO and i forget the other

[Dieseldan]

hmmmmmmmmmm

Rear seat cowl, carbon fiber rear hugger,carbon fiber chain gaurd,vortex rear sproket,woodcrafts,full leo vince titanium exhaust,BMC race filter,Diff tuneboy map,full race gear for track.

and maybe more.........

[butcher bergs]

as a NV your 1000cc classes are limited to 2 i think. GTO and i forget the other

GTO and GTU...(1 on Saturday and 1 on Sunday)...which is fine. Just running it for fun and some extra practice laps. And hell, if I can pad my index a little more, why the heck not right?